Stratus SAE-UT10000
10,000lb Commercial Grade On-Ground or In-Ground Mount Low Profile Full Rise Scissor Lift
$9,055
$7,874
Description
This low-profile double scissor lift comes with On-Ground surface mount or In-Ground flush mount design, it is pneumatic safety lock release with overload protection, easy to operate and maintain. Full size scissor car lift is suitable to hold 10,000 lbs. or less, ideally for inspection, repair and maintenance of various types of vehicles.
Features
- Commercial grade open center design
- On-Ground surface mount or In-ground flush mount (see detailed foundation plan)
- Low profile, minimum height is 4 5/16″
- Pneumatic safety lock release
- Durable cylinders with anti-surge valves
- Alloy solid steel X structure, good rust resistance and not easy to deform
- Ramp can be used as platform extension suitable for different length of chassis
- Wear-resisting bearings
- 24V low voltage control system
- Platforms can be extended for long vehicles
- Self-lubricated bushing and bearing
- Proofed by dynamic test with 115% of rated capacity and static test with 150% rated capacity
- Powder coating finish: Granite Gray (RAL 7026) + Rein orange (RAL 2004)
Standard Accessories (Included)
- 4pcs of 2 1/4″ Rubber Pads
- 4pcs of 4″ Rubber Pads
Optional Add-On Accessories (Sold Separately)
- Support Bar
- Set of 4 approach ramp kit for low profile vehicles
Specifications
| Model | UT10000 |
| Capacity | 10,000 LBS |
| Lifting Time | ~90SEC |
| Max Height | 72 1/16” (1830 MM) |
| Min Height | 4 5/16” (110 MM) |
| Runway Length without Ramps | 60 1/4” (1530 MM) |
| Runway Length with Ramps | 84 1/4” (2140 MM) |
| Overall Width | 85 13/16” (2180 MM) |
| Runway Width | 26 3/16” (665 MM) |
| Between Runway | 33 7/16” (850 MM) |
| Motor | 4 HP, 220V, 60 HZ, 1ph |
| Oil | AW32 or AW46 |
| Breaker | 30A |
| Platform Weight | 2,006 LBS |
| Platform Dimension | 69” L * 29” W * 19” H |
| Control Panel Weight | 198 LBS |
| Control Panel Dimension | 44” L * 18” W * 22” H |
Stratus Locations:
- College Station, TX
*Locations subject to change, please contact us for the most updated information
Details On Freight
CLICK HERE for full details on equipment delivery options.
Your Auto Lift ships on a LTL common carrier freight company. It is taken to your location on a 48 foot semi truck. Please note the following before making your purchase:
- You are responsilbe for unloading the lift from the truck. The truck driver does not unload it for you.
- Lift Gate delivery service is not available for auto lifts.
- You cannot unload an auto lift from the truck by hand. You must have machinery that can lift the full weight on your auto lift for unloading from the truck. Fork Lift, Bobcat, Tractor, Tow Truck, Back Hoe are all good options.
- If you cannot unload from a truck, we can ship to our carrier's nearest freight terminal for you to pickup with a trailer or moving van.
- You are responsible for calling the freight company to make a delivery appointment. We don't know your schedule so we can't do this for you.
When your lift ships, we will email you the carrier information and tracking number. Freight shipping is slower than small package shipping and can take 3-14 days depending on your location so please be patient.