Skip to content
🏠 Family-Owned & Operated | 🇺🇸 American-Run & No Call Centers | About Us ->
🏠 Family-Owned & Operated | 🇺🇸 American-Run & No Call Centers | About Us ->

Halo HL2C-10KALI Clear Floor 2 Post Car Lift - 10,000 LB Capacity ALI CERTIFIED

by HALO
SKU HL2C-10KALI
Save $401.00 Save $401.00
Original price $4,200.00
Original price $4,200.00 - Original price $4,200.00
Original price $4,200.00
Current price $3,799.00
$3,799.00 - $3,799.00
Current price $3,799.00
$4,200.00 $3,799.00
Request a quote
Equipment Delivery Options

At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.

I have the equipment to unload my order

Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.

What to keep in mind when choosing this option:

  • The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
  • Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
  • You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
  • Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
  • There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.

In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.


Pick up at one of our warehouses

Do you have a hitch trailer to transport your lift? If so, then this might be the best option.

What to keep in mind when choosing this option:

  • Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
  • Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.

Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.


Dock Hold from LTL Carrier

Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.

You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.


Ship directly to a local installer

Neither of the above delivery options suits you? Then we have the solution.

We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.

What to keep in mind when choosing this option:

  • You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
  • We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)

Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.

Returns & Refunds

CANCELLATIONS

We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.

RETURNS

Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.

ADDITIONAL WARRANTY INFO

For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.

THE HALO LIFTS 2 POST-ALI-CERTIFIED LIFT

IN STOCK SHIPPING WITHIN 2/3 BUSINESS DAYS

ALI Certified Gold Label and MET Listed certification label shown on Halo lifts

Features

• 10,000lbs capacity.
• Dual hydraulic direct-drive cylinders made to a high standard.

• Aero cable used for synchronization.
• Single-point manual safety release mechanism, disengages both columns simultaneously from one side.
• Self-lubricating UHMW Polyethylene sliders.
• Clear-floor design provides unobstructed floor use.
• Overhead safety shut-off device prevents vehicle damage.
• Stackable rubber pads and 1.5”, 3”, 5” adapters as standard supply.
• Standard two height settings accommodate varying ceiling heights.
• Toe guards and tool trays come as standard.

Halo clear floor two-post lift dimensional diagram with labeled dimensions A through F and arm reach top view

Specifications
Model HL2-10KALIX
This Model

Manual

MANUAL


Certificate ALI Certified
Lock Release Single Point Release
Warranty 2 YEAR
Lifting Capacity 10,000 LB
Overall Height 144.21 " (HL2-10KALIX)
167.83” HEIGHT EXTENSION NON CERTIFIED

Overall Width 140.9" (narrow spacing)
146.8" (medium spacing)
152.7" (wide spacing)

Maximum Lift height with Truck Adapters 78.35”
Maximum Lift height without Truck Adapters 69"
Minimum Height of Adjustable Pads from Ground 4.33”
Drive Through Width (Carriage to Carriage) 100.55" (narrow spacing)
106.46" (medium spacing)
112.36" (wide spacing)

Column to Column Width 111.42" (narrow spacing)
117.32" (medium spacing)
123.23" (wide spacing)

Driving Mode Direct Drive
Motor
220V Single Phase 3HP 10A (recommend a 30A breaker)

Time to full rise 50 seconds
Hydraulic Oil 3-5 gallons AW32/AW46 (not included)
Truck Adapters 3 sets: 1 1/2", 3", and 6" tall
Front Arms 3 Stage reach from 19 5/16" to 41 7/8"
Back Arms 3 Stage reach from 37 5/16" to 60 3/16"
Column Steel Thickness 1/4"
Carriage Steel Thickness 1/4"
Carriage Yoke Thickness 9/16"
Arm Steel Thickness 1/4"
Base Plate Steel Thickness 13/16"
Shipping Weight
2000 LB and 200 LB (2 ft height extension for HL2C-ALIXOH)

Shipping package size
142"L x 22"W x 38"H and 30"L x 17"W x 17"H ( HL2-10KALIXOH)

Concrete Requirement 6" thick at 3500 psi reinforced with fiberglass or steel (4" thick for vehicles 9000LB and below)
Model HL2-10KALIX


BASE PLATE DIAGRAM FOR 3 DIFFERENT WIDTHS SETTINGS

Halo lift column base plate anchor bolt layout diagram showing three width options

Halo lift column base plate diagram showing 17.91 in square footprint and anchor hole spacing

Specifications

Model HL2-10KALIX
Certificate ALI Certified
Lock Release Single Point Release
Warranty 2 YEAR
Lifting Capacity 10,000 LB
Overall Height 144.21 " (HL2-10KALIX)
167.83” HEIGHT EXTENSION NON CERTIFIED
Overall Width 140.9" (narrow spacing)
146.8" (medium spacing)
152.7" (wide spacing)
Maximum Lift height with Truck Adapters 78.35”
Maximum Lift height without Truck Adapters 69"
Minimum Height of Adjustable Pads from Ground 4.33”
Drive Through Width (Carriage to Carriage) 100.55" (narrow spacing)
106.46" (medium spacing)
112.36" (wide spacing)
Column to Column Width 111.42" (narrow spacing)
117.32" (medium spacing)
123.23" (wide spacing)
Driving Mode Direct Drive
Motor 220V Single Phase 3HP 10A (recommend a 30A breaker)
Time to full rise 50 second
Hydraulic Oil 3-5 gallons AW32/AW46 (not included)
Truck Adapters 3 sets: 1 1/2", 3", and 6" tall
Front Arms 3 Stage reach from 19 5/16" to 41 7/8"
Back Arms 3 Stage reach from 37 5/16" to 60 3/16"
Column Steel Thickness 1/4"
Carriage Steel Thickness 1/4"
Carriage Yoke Thickness 9/16"
Arm Steel Thickness 1/4"
Base Plate Steel Thickness 13/16"
Shipping Weight 2000 LB and 200 LB (2 ft height extension for HL2C-ALIXOH)
Shipping package size 142"L x 22"W x 38"H and 30"L x 17"W x 17"H ( HL2-10KALIXOH)
Concrete Requirement 6" thick at 3500 psi reinforced with fiberglass or steel (4" thick for vehicles 9000LB and below)
Freight Shipping

To the continental USA

Need help?

Contact us for support today

Financing

Multiple great options available

40+ Locations

Nationwide