Daytona LMS6 6,000lb Mid Rise Scissor Lift
Authorized Dealer
We are an authorized dealer for all DAYTONA branded products.
Description
6,000 lb lifting capacity with 45 second rise time.
An ultra-thin 6,000 lb mid-rise scissor lift with a double cylinder design, built for low-clearance vehicles and shops with limited space.
Product Highlights
- Double cylinder design for powerful lifting
- Ultra-thin low profile with 5.5" min clearance
- Mechanical safety locks and standard height extensions
Ideal for tire, brake, and body work.
FEATURES
- Double cylinder design for smooth and powerful performance
- Mechanical safety locks ensure maximum operator security
- Ultra-thin profile for low-clearance vehicle accessibility
- Durable powder-coated finish resists wear and chemicals
- Standard height extensions included for frame versatility
- Compact footprint ideal for smaller service bays
SPECS
Power Requirements
120V 1.5HP 15A 1PH 60Hz
Key Performance
- Lifting Capacity: 6,000 lbs
- Rise Time: 45 Seconds
- Min Clearance: 5.5"
Dimensions, colors and items are subject to change without prior notice due to our continuous improvement program.
| Specification | Measurement |
|---|---|
| Max Lifting Height | 54.0" |
| Platform Dimensions | 63.0" L x 39.0" W |
| Base Dimensions | 84.0" L x 40.0" W |
| Extensions & Pads | Adds 2.5" to 8" height |
| Shipping Dimensions: Lift | 87" x 43" x 9" / 900 lbs |
| Shipping Dimensions: Pump | 31" x 14" x 12" / 80 lbs |
Compact Power for Specialized Service
The LMS6 is designed for shops and enthusiasts who need professional lifting capabilities without the permanent footprint of a full-size 2-post lift. Browse the full range of Daytona scissor lifts, or step up to the LHS7 high-rise scissor lift if you need full standing height.
Tire & Brake Bays
The mid-rise height provides perfect ergonomic access for wheel-off services, suspension work, and brake repairs.
Body & Detailing
Ideal for lower-body detailing, paint correction, and light bodywork where raising the vehicle to chest height is sufficient.
Home & Hobbyist Garages
The 120V power requirement and compact storage profile make it the ultimate choice for home restoration projects.
FAQ
What is the maximum lifting height of the LMS6?
The LMS6 has a maximum lifting height of 54 inches. This height is ideal for most tire, brake, and suspension services, as well as lower-body detailing.
Can this lift handle low-profile vehicles?
Yes, the LMS6 features an ultra-thin design with a minimum clearance of only 5.5 inches at its lowered height, allowing it to fit under most sports cars and lowered vehicles.
Are height extensions included with the lift?
Yes, height extensions and lifting pads are included as standard equipment. These allow you to add between 2.5" to 8" to the lifting height to accommodate various vehicle frames and pick-up points.
What are the electrical power requirements?
The LMS6 is designed for easy installation and operates on a standard 120V, 1.5HP, 15 Amp, Single Phase (1PH), 60Hz power supply.
