BendPak SP-7XEF - 7,000-lb. Capacity / Flush-Mount Full-Rise Scissor Lift
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Build a cleaner bay around a flush-mount full-rise scissor lift with the SP-7XEF. Rated at 7,000-lbs. capacity, this frame-engaging car lift uses independent pads and a recessed installation to keep the floor area more open when the lift is lowered. It is a strong choice for shops that want professional lifting capability without fixed platforms sitting above the service floor.
Full-Rise Lifting That Disappears Into the Floor

The BendPak SP-7XEF Flush-Mount Full-Rise Scissor Lift gives professional shops the height, access, and 7,000-lb. lifting capacity of a serious service lift with the clean bay layout of a recessed installation. When lowered, the lift sits flush with the floor, creating a drive-over work area that keeps the bay easier to move through when the lift is not in use. For automotive service facilities, quick-lube bays, and modern workshops where floor space matters, the SP-7XEF delivers full-rise performance without leaving bulky raised platforms in the way. Its frame-engaging design supports the vehicle at approved lifting points, helping technicians get the access they need for undercarriage maintenance, inspections, repairs, and general service work.
Flush-Mount Scissor Lift Design With Open-Center Access

The SP-7XEF uses sturdy flat steel platforms, drive-up ramps, ramp extensions, lift pads, hinged sections, and fixed sections to create a stable lifting surface that works with a range of wheelbases. Its open-center scissor layout improves access beneath the vehicle while keeping the lift structure compact and efficient. Because this is a flush-mount scissor lift, the installation is designed around a recessed floor area. When matched to the right bay, the SP-7XEF helps preserve clean floor movement, drive-over convenience, and a more finished shop appearance while still providing the working height expected from a full-rise lift.
Console-Controlled Hydraulic Power for a Cleaner Bay

The lift console houses the controls and power unit, creating a centralized operating station for the SP-7XEF. The power unit generates hydraulic pressure to move the hydraulic cylinders and raise the platforms, while hydraulic hoses and air lines connect through the console for more streamlined operation. A dual-cylinder hydraulic design provides the lifting power needed for vehicles up to 7,000 lbs. The console can also be positioned to better suit different workshop layouts, giving installers and shop owners more flexibility when planning the bay.
Pneumatic Safety Locks and Frame-Engaging Support

Embedded pneumatic safety locks provide multiple locking positions and help keep the platforms secure during service, including in the event of power loss or hydraulic failure. Lift pads with rubber contact points help engage vehicle lifting points while prioritizing vehicle and operator safety. The bases house key structural and operating components, including the scissor legs, hydraulic cylinders, air cylinders, safety locks, and anchor points. Designed for indoor installation, the SP-7XEF can also be paired with optional attachments such as the Lift Arm Kit to expand compatibility with a wider range of vehicle sizes.
Key Features
Flush-Mount Full-Rise Design
Installs into a recessed bay so the lift sits cleanly in the floor when lowered while still delivering full-rise service height.
7,000-lb. Lifting Capacity
Built for professional vehicle service, inspections, and repair work with the strength to handle vehicles up to 7,000 lbs.
Open-Center Access
The frame-engaging scissor layout leaves the center area more accessible for undercarriage service than wheel-engaging platforms.
Console-Controlled Operation
The console houses the controls and power unit while routing hydraulic hoses and air lines for a cleaner shop setup.
Pneumatic Safety Locks
Multiple locking positions help keep the platforms secure during service, including in the event of power loss or hydraulic failure.
Flexible Vehicle Setup
Ramp extensions, lift pads, and optional lift arm kit compatibility help the SP-7XEF adapt to more wheelbases and lifting points.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 7000 lb |
| RISE | |
| Max Lifting Height | 70.5 in |
| Lifting Time | 60 seconds |
| LOCKING HEIGHTS | |
| 1st Locking Position | 24.5 in |
| 2nd Locking Position | 69.75 in |
| DIMENSIONS | |
| Pad Length | 62.5 in |
| Pad Width | 21.75 in |
| Length | 106 in |
| Width Between Platforms | 38 in |
| POWER UNIT AND VOLTAGE | |
| Horsepower | 1.5 HP |
| Voltage | 208-240V / 50/60 Hz / 1-Phase |
| Sound Level | 40 dBA |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 27 x 108 x 35 in |
| Shipping Weight | 2272 lb |
| Shipping Method | LTL |
| Offload Requirement | Forklift |