BendPak SP-7XE - 7,000-lb. Capacity / Full-Rise Scissor Lift
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Service vehicles with a full-rise scissor lift that keeps the work area open and accessible. The SP-7XE delivers 7,000-lb. capacity with frame-engaging lift pads and independent platform movement, giving shops a strong option for wheel, brake, suspension and general service work. Its compact footprint helps maximize bay space while still providing useful under-vehicle access.
Go Full Rise Without Giving Up the Center of the Bay
The BendPak SP-7XE Full-Rise Scissor Lift is built for shops that need real working height, strong frame-engaging support, and a cleaner path to the underside of the vehicle. With a 7,000-lb. lifting capacity, full-rise elevation, and a surface-mount scissor design, it gives full-service auto shops, quick-lube pits, and space-conscious service bays a powerful alternative to larger lift footprints. Instead of forcing technicians to work around a center cross member, the SP-7XE keeps the middle of the bay open so undercarriage service feels more natural. It is a strong choice for maintenance, inspection, wheel service, and general repair work when you need more overhead room, better access, and the convenience of a professional full-rise scissor lift.
Open-Center Access With a Surface-Mount Scissor Design
The SP-7XE installs directly on the shop floor without a cross member running across the center of the lift. That open-center layout improves access to critical undercarriage areas and helps reduce the awkward stooping, crawling, and reach-around work that can slow technicians down. Reinforced steel at the base and along the top of the runways helps the lift stay stable without additional center structure. The result is a full-rise scissor lift that gives technicians a clear work zone beneath the vehicle while still delivering the strength needed for daily professional service.
Dual Hydraulic Cylinders Built for Balanced Lifting
The SP-7XE uses an electric-hydraulic power system with controls positioned for convenient operation. Two redesigned, extra-large master hydraulic cylinders help pressurize each scissor frame, supporting a balanced rise during every lift cycle. Integrated flow restrictors help control descent in the rare event of a serious hydraulic fluid leak or hose rupture. Combined with the heavy boxed-steel base frame, this hydraulic system helps vehicles move smoothly up and down instead of rocking through the lift cycle.
Safety Locks, Zerk Fittings, and Contact Blocks Built In
Pneumatic safety locks can be released from the operator stand, keeping technicians from manually lifting release arms or latches. Multiple locking positions give operators more service height options, and the locks engage and disengage with the movement of the scissor lift frames. Hardened pivot pins with Zerk grease fittings help keep key wear points lubricated for smoother operation and long-term serviceability. Four durable cushioned rubber contact blocks come standard, helping the frame-engaging lift contact vehicle lifting points securely when properly placed. Safety decals, maintenance decals, a lifting point guide, and instructions are also included to support proper operation.
- 7,000-lb. Full-Rise Capacity — Raises vehicles with the height and strength professional shops need for serious maintenance, repair, and undercarriage access.
- Open-Center Service Access — The surface-mount scissor layout has no cross member across the center, giving clearer access to critical underbody areas.
- Dual Hydraulic Cylinders — Two extra-large hydraulic cylinders pressurize each frame for a balanced rise, with integrated flow restrictors for controlled descent.
- Pneumatic Safety Locks — Locks release from the operator stand and provide multiple locking positions, helping keep the lift secure during service.
- Boxed-Steel Stability — A heavy formed base frame helps the vehicle move smoothly through the lift cycle without the side-to-side feel cheaper lifts can introduce.
- Zerk-Fitted Pivot Points — Hardened pivot pins with grease fittings support smoother movement and easier maintenance over the life of the lift.
| Capacity | |
|---|---|
| Lifting Capacity | 7000 lb |
| Rise | |
| Max Lifting Height | 70.5 in |
| Lowered Height | 6.5 in |
| Lifting Time | 60 seconds |
| Locking Heights | |
| 1st Locking Position | 24.5 in |
| 2nd Locking Position | 69.75 in |
| Dimensions | |
| Pad Length | 62.5 in |
| Pad Width | 22 in |
| Length | 165 in |
| Width Between Platforms | 38 in |
| Power Unit and Voltage | |
| Horsepower | 1.5 HP |
| Voltage | 208-240V / 50/60 Hz / 1-Phase |
| Sound Level | 40 dBA |
| Shipping and Delivery | |
| Shipping Dimensions | 27 x 106 x 43 in |
| Shipping Weight | 2502 lb |
| Shipping Method | LTL |
| Offload Requirement | Forklift |
