BendPak MD-6XP - 6,000-lb. Capacity / Portable Mid-Rise Frame Lift
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Get mid-rise lifting capability in a portable frame-engaging design with the MD-6XP. Built with 6,000-lbs. capacity, this car lift helps technicians access wheels, brakes, suspension, rocker panels and underbody areas while keeping the bay more flexible than a permanent full-height lift. It is a practical choice for garages, body shops and service departments that need strong lifting in a compact footprint.
Portable Mid-Rise Lifting That Pulls Its Weight
The BendPak MD-6XP Portable Mid-Rise Frame Lift gives shops and home garages 6,000 lbs. of lifting capacity in a compact, movable platform designed for fast service access. Built to fit into narrower bays and tight work areas, this portable mid-rise lift helps raise cars and light-duty trucks for wheel service, brake work, suspension access, detailing, inspections, and general maintenance. The real advantage is mobility. The portable motor cart also serves as a tow handle, allowing the lift to move from bay to bay instead of permanently owning one spot on the floor. For shops that need flexible lifting without installing a full-size lift in every bay, the MD-6XP brings useful height, frame-engaging support, and BendPak durability wherever the work is waiting.
Adjustable Arms for Frame-Engaging Service
The MD-6XP uses adjustable arm assemblies to engage the vehicle frame at secure lifting points. This gives technicians more flexibility than a platform-only lift and helps accommodate a wide range of cars and light-duty trucks. Truck adapters are included, adding more setup range for vehicles that need additional contact height. Whether the job is brake service, detailing, or quick underbody access, the MD-6XP helps put the vehicle at a more comfortable working height without taking over the shop.
Hydraulic Power and Built-In Safety Locks
A dual master hydraulic cylinder with a built-in flow divider helps the MD-6XP rise and descend evenly. Balanced hydraulic movement is important for frame-engaging lifts, where stable support and controlled platform movement matter throughout the service process. A safety lock bar with multiple lock positions engages during operation, giving technicians secure working heights for different jobs. This combination of hydraulic lift control and mechanical locking support helps make the MD-6XP a dependable mid-rise tool for regular shop use.
Compact Footprint with Bay-to-Bay Mobility
The MD-6XP is designed to save floor space and move easily when the job changes. Its small footprint is useful in crowded shops, narrow bays, and home garages where a full-rise lift may not be practical. Because the portable motor cart works as a tow handle, repositioning the lift is straightforward. Roll it where it is needed, set up the adjustable arms, lift the vehicle, and get to work with less downtime and less fixed-equipment commitment.
Key Features
6,000-lb. Capacity
Built for cars and light-duty trucks that need mid-rise service access. The MD-6XP gives shops strong lifting ability in a portable frame-lift format.
Portable Motor Cart
The power unit cart also serves as a tow handle. Move the lift from bay to bay instead of locking it into one workspace.
Adjustable Arm Assemblies
Frame-engaging arms help position the lift at secure vehicle contact points. The setup supports a wide range of service applications.
Truck Adapters Included
Included truck adapters add contact height for compatible vehicles. They help expand the lift's usefulness across cars and light-duty trucks.
Multiple Lock Positions
The safety lock bar offers multiple working heights. Technicians can choose the position that fits the job and working comfort.
Compact Shop Footprint
The portable mid-rise format fits narrow bays and crowded garages. It adds lifting capability without demanding permanent floor space.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 6000 lb |
| RISE | |
| Max Lifting Height | 47 in |
| Lowered Height | 4.75 in |
| Lifting Time | 45 seconds |
| LOCKING HEIGHTS | |
| 1st Locking Position | 22 in |
| 2nd Locking Position | 33.25 in |
| 3rd Locking Position | 42 in |
| DIMENSIONS | |
| Length | 76 in |
| POWER UNIT AND VOLTAGE | |
| Horsepower | 1.5 HP |
| Voltage | 110V / 50/60 Hz / 1-Phase |
| Sound Level | 40 dBA |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 44.5 x 84.5 x 10 in |
| Shipping Weight | 912 lb |
| Shipping Method | LTL |
| Offload Requirement | Liftgate |
