Skip to content
🏠 Family-Owned & Operated | 🇺🇸 American-Run & No Call Centers | About Us ->
🏠 Family-Owned & Operated | 🇺🇸 American-Run & No Call Centers | About Us ->

BendPak LR-60P - 6,000-lb. Capacity / Portable Low-Rise Lift

by BendPak
SKU 5175728

FREE SHIPPING

To commercial locations with a forklift for unloading.

Original price $3,595.00 - Original price $3,595.00
Original price
$3,595.00
$3,595.00 - $3,595.00
Current price $3,595.00
$3,595.00
Request a quote
Equipment Delivery Options

At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.

I have the equipment to unload my order

Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.

What to keep in mind when choosing this option:

  • The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
  • Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
  • You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
  • Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
  • There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.

In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.


Pick up at one of our warehouses

Do you have a hitch trailer to transport your lift? If so, then this might be the best option.

What to keep in mind when choosing this option:

  • Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
  • Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.

Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.


Dock Hold from LTL Carrier

Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.

You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.


Ship directly to a local installer

Neither of the above delivery options suits you? Then we have the solution.

We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.

What to keep in mind when choosing this option:

  • You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
  • We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)

Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.

Returns & Refunds

CANCELLATIONS

We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.

RETURNS

Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.

ADDITIONAL WARRANTY INFO

For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.

Handle quick wheel, brake and body service with the LR-60P portable low-rise lift, built for 6,000-lbs. capacity and flexible shop or garage use. This low-rise car lift gives technicians practical access for tire changes, detailing, inspections and light maintenance without needing a full-height bay. Its portable design helps service areas stay adaptable when floor space and workflow flexibility matter.

Portable Low-Rise Lift Freedom with 6,000-lb. BendPak Strength

Portable Low-Rise Lift Freedom with 6,000-lb. BendPak Strength

The BendPak LR-60P Portable Low-Rise Lift is built for shops and garages that need compact lifting power they can move where the work is. With a 6,000-lb. lifting capacity, this portable low-rise car lift is designed for wheel service, brake work, suspension access, detailing, and quick maintenance on passenger cars and light trucks. High-density UHMW rollers and a tow handle make the LR-60P easy to move from bay to bay, which is a major advantage for shops with limited floor space or changing service layouts. It gives users the low-rise access of the LR-60 platform with the mobility needed to diversify a work area fast.

Move the Lift, Not Your Whole Shop Around It

Move the Lift, Not Your Whole Shop Around It

The portable design is the main reason to choose the LR-60P. If your service bays need to flex throughout the day, the lift can be rolled into position, used for the job, and moved aside when the floor needs to open back up. Despite its mobility, the LR-60P keeps a compact 4-inch collapsed profile, making it practical for low-stance vehicles and tight spaces. It is a strong fit for small garages, multi-use bays, and shops that cannot dedicate permanent floor space to every service task.

Low-Rise Access with Safety and Clearance Built In

Low-Rise Access with Safety and Clearance Built In

The LR-60P uses an electric-hydraulic power system with multi-position safety locks for controlled lifting and service support. With the push of a button on the control panel, dual locks release on each frame while the operator remains safely positioned during descent. A dropped crossbar improves drive-over clearance and makes it easier to position vehicles onto the frames. Once raised, the center portion of each frame engages OEM jacking points, giving technicians better access for wheel service, suspension work, and quick repairs.

Steel Channel Construction and Industrial Hydraulics

Steel Channel Construction and Industrial Hydraulics

A heavy-duty steel channel frame gives the LR-60P the stability needed for active service bays, while the single hydraulic cylinder uses a machined steel piston, U-cup piston seals, backups, and wear bands to help control fluid bypass. Durable hard-rubber lift blocks come included for contact point protection and long service life. For shops that need a portable low-rise lift without giving up BendPak-level construction, the LR-60P is the moveable workhorse in the lineup.

Key Features

Portable 6,000-lb. Lift

Portable 6,000-lb. Lift

The LR-60P gives shops low-rise lifting strength with the mobility to move between bays. It is ideal when floor space has to work multiple jobs.

UHMW Roller Mobility

UHMW Roller Mobility

High-density UHMW rollers help one person reposition the lift around the shop or garage. The portable design keeps work flexible without adding bulky equipment.

4-Inch Low Profile

4-Inch Low Profile

The lift collapses to just 4 inches high, helping low-stance vehicles clear the frame. It also keeps the footprint manageable in tight work areas.

Control-Panel Lock Release

Control-Panel Lock Release

Dual locks release from the control panel, keeping operators away from the lift during descent. The result is smoother, more controlled lowering.

Dropped Crossbar Clearance

Dropped Crossbar Clearance

A dropped crossbar improves vehicle drive-over clearance and helps preserve access for wheel and suspension service. It adds stability without slowing the job.

Included Rubber Blocks

Included Rubber Blocks

Durable hard-rubber lift blocks come standard for protected contact at vehicle lifting points. They are built for years of practical shop use.

Specifications (Imperial)

CAPACITY
Lifting Capacity 6000 lb
RISE
Max Lifting Height 23 in
Max Lifting Height with Blocks 26 in
Lowered Height 4 in
Lifting Time 45 seconds
LOCKING HEIGHTS
1st Locking Position 15 in
2nd Locking Position 20.25 in
3rd Locking Position 23.5 in
DIMENSIONS
Pad Length 53 in
Pad Width 18 in
Length 81 in
Width Between Platforms 34.75 in
POWER UNIT AND VOLTAGE
Horsepower 1.5 HP
Voltage 110V / 50/60 Hz / 1-Phase
Sound Level 40 dBA
SHIPPING AND DELIVERY
Shipping Dimensions 84 x 73 x 20 in
Shipping Weight 974 lb
Shipping Method LTL
Offload Requirement Liftgate
Freight Shipping

To the continental USA

Need help?

Contact us for support today

Financing

Multiple great options available

40+ Locations

Nationwide