BendPak HDS-14 - 14,000-lb. Capacity / Four-Post Lift / Standard Length
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Handle heavy-duty service work with the HDS-14 extended four-post lift, built with 14,000-lbs. capacity for trucks, SUVs, fleet vehicles and larger shop applications. This four-post car lift provides a stable drive-on platform for inspections, maintenance and under-vehicle access, making it a practical choice for service bays that need dependable lifting strength and extra runway length.
14,000-lb. Four-Post Muscle Built for Real Shop Work

The BendPak HDS-14 Four-Post Lift is engineered for professional shops that expect their equipment to work hard every day. With 14,000-lb. lifting capacity, extended runways, and commercial-grade construction, this four-post car lift is built for demanding service, storage, inspections, and maintenance on a wide range of vehicles. BendPak does not treat key components as add-ons or extras. The HDS-14 is packed with the durability, safety, and productivity features shops should expect from a serious commercial-grade four-post lift. It is designed to help technicians spend less time worrying about what they are working under and more time getting the job done.
Extended Runways and Low-Angle Approach for Bigger Vehicles

The HDS-14 gives heavier vehicles the runway length and support they need. Extended runways help accommodate larger wheelbases, while mid to long-style approach ramps make drive-on loading easier for vehicles with lower ground clearance. Built-in rear-wheel chocks add practical support during positioning. Runways include rail kits for optional accessories, making the HDS-14 more than a basic drive-on lift. Optional RJ7W rolling bridge jacks can be added for wheel and brake service, while optional drip trays and drive-thru ramps allow shops to tailor the lift to storage, service, and daily workflow needs.
Aircraft Cables, Oversized Sheaves, and Enclosed Components

The HDS-14 uses four 1/2-inch stainless-steel aircraft-quality lifting cables, each with a breaking strength of more than 14,000 lbs. These cables are designed specifically for lifting applications, balancing abrasion resistance and fatigue protection for long-term use in demanding environments. Oversized 10.5-inch dual-hub cable sheaves and rugged 1.75-inch roller axles help reduce cable fatigue and component wear. Lifting cables, airlines, safety latches, and sheaves are fully enclosed within the lift structure, helping protect critical systems while keeping the bay cleaner and safer.
Safety Locks, Hydraulic Control, and Dependable Daily Operation

Spring-loaded safety locks automatically engage continuously as the HDS-14 rises, while adjustable safety ladders allow precise runway leveling, even on slightly sloped floors. A secondary slack-cable lock system provides backup protection in the unlikely event of cable failure. A push-button pneumatic lock release makes lowering operations fast and straightforward, while an integrated hydraulic flow restrictor helps control descent in the unlikely event of hose rupture. The maintenance-free electric-hydraulic power system, large base plates, customizable power unit location, and ETL approval all support a four-post lift designed for real shop dependability.
Key Features
Overbuilt 14K Platform
A 14,000-lb. capacity and extended runways give the HDS-14 the strength and support needed for tough professional lifting applications.
Extended Runway Support
Longer runways help accommodate larger wheelbases while approach ramps improve loading for low ground-clearance vehicles.
Aircraft Cable Strength
Four 1/2-inch stainless-steel aircraft-quality cables support durable, fatigue-resistant lifting performance.
Oversized Sheaves
Large dual-hub cable sheaves and rugged roller axles help reduce cable wear and long-term maintenance demands.
Push-Button Lock Release
A pneumatic safety lock release makes lowering faster and easier while spring-loaded locks engage during lifting.
Service-Ready Runways
Rail-equipped runways support optional rolling bridge jacks, drip trays, and drive-thru ramp configurations.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 14000 lb |
| RISE | |
| A Min Runway Height | 7.5 in |
| B Max Rise | 70 in |
| C Max Lifting Height | 77.5 in |
| OUTSIDE DIMENSIONS | |
| D Width | 130 in |
| E Outside Length | 213 in |
| F Overall Length | 242 in |
| G Height | 92 in |
| INSIDE DIMENSIONS | |
| H Inside Columns | 120 in |
| I Drive-Thru Clearance | 98 in |
| RUNWAYS | |
| J Runway Width | 20 in |
| K Runway Length | 197.5 in |
| L Width Between Runways | 34.5 - 41.5 in |
| M Runway Centerline | 57.5 - 64.5 in |
| N Outside Edge of Runways | 77.5 - 84.5 in |
| MINIMUM WHEELBASE | |
| Rated Wheelbase Capacity | 140 in |
| 25% Capacity | 80 in |
| 50% Capacity | 100 in |
| 75% Capacity | 120 in |
| LOCKING | |
| Locking Positions | 15 |
| Locking Spacing | 4 in |
| POWER UNIT AND VOLTAGE | |
| Horsepower | 2 HP |
| Voltage | 208-230V / 60 Hz / 1-Phase |
| Sound Level | 45 dB |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 23 x 209 x 46 in |
| Shipping Weight | 2606 lb |
| Shipping Method | Flatbed |
| Offload Requirement | Forklift |