AMGO PRO-14AE 14,000 lb Alignment Lift
Authorized Dealer
We are an authorized dealer for all AMGO branded products.
Description
The AMGO PRO-14AE features extra-long runways engineered for both general service and alignment. Designed to accommodate a wide range of vehicles from passenger cars to heavy-duty commercial trucks, this lift is built for durability, safety and long-term reliability in high-volume shops.
Features
• 14,000 lbs capacity;
• AMGO ETL certified power unit comes as
standard;
• Mechanical self-locking safety device with air-driven lock
release;
• Standard primary safety locks and cable-slack protection
system;
• Cable-driven system with areo standard high quality
cables;
• Hydraulic cylinder is designed and manufactured to a high
standard, utilizing high-quality oil seals and compensation valve;
•
Non-skid diamond platforms;
• Integrated slip plates and adjustable
turnplate pockets.
Specifications
| Model | PRO-14AE | |
|---|---|---|
| Lifting Capacity | 14,000 Ibs | |
| Lifting Time | 81s | |
| Overall Length (Inc Ramps) | A | 286" |
| Runway Length | B | 229" |
| Overall Width | C | 130 7/8" |
| Width Between Columns | D | 116" |
| Max. Lifting Height | E | 77 9/16" |
| Max. Lock Height to top of runway | 74 7/16" | |
| Overall Height | F | 86 3/16" |
| Minimum Height | G | 9 13/16" |
| Max. Underneath Height | H | 68 7/8" |
| Max. Lock Underneath Runway | 65 3/4" | |
| Drive-Thru Clearance | I | 102 1/16" |
| Width Between Runways | J | 46" |
| Outside Edge of Runways | K | 86" |
| Min. Four Wheel Align | L | 92 5/8" |
| Max. Four Wheel Align | M | 177 3/16" |
| Max. Two Wheel Align | N | 207 1/16" |
| Gross Weight | 3,752 lbs | |
| Motor | 2.0HP |
Oil-water separator and solenoid air valve are installed on the power side column.
ETL certified AMGO power unit.
Standard primary safety locks and cable-slack protection system.
Hydraulic cylinder is designed and manufactured to a high standard, utilizing high-quality oil seals and compensation valve.
Non-slip diamond platforms come standard.
Adjustable turnplate blocks accommodate various wheelbases.
Optional extension platform kit. Kits No.: 41801-01.
Optional turnplate; 2 units needed for each alignment lift.. Kits No.: 40101.
Optional adjustable blocks used with extension platform , Kits No. 41803.
Optional Air line kits-All AMGO four post lifts are designed to use the air line kits for rolling jack. Kits No.:40102A
Optional rolling jack with 8,000lbs capacity: RJ-8A - pneumatic.
Shipping Information
1 units/package, packing measurement (LxWxH) : 218 3/4"x22 5/8"x33 7/16". Packed with Power Unit.
2 units/package, packing measurement (LxWxH) : 218 3/4"x22 5/8"x66 1/8"
After the machine is pulled out from the container, use the forklift to lift the machine from the middle position.
Use a forklift to lift up one end of the machine about 2"-5" from the ground, and pull the machine out from the container with the assistance of lifting belt or other cables.
It is not allowed to use the forklift to lift the machine completely from one end, which will easily cause the machine to be deformation.
