KATOOL KT-4H110
11,000lb 4-Post Lift110V or 220V
$3,600
$3,299
Features
*Concrete thickness must be at least 3.93” (100 MM) with a 3000 PSI rating. Failure to install this lift on the proper concrete could result in serious injury or death! It is the customer’s responsibility to verify concrete thickness and strength before purchase and installation.
- 11000lbs lifting capacity.
- CE Approved and Certified. It has adopted the 115% dynamic loading capacity standard and was 150% static loading capacity tested.
- Single Point Manual Safety Lock Release
- Four mechanical locking devices, a secondary lock system acts as a slack-cable device to engage in the unlikely event of cable failure.
- Power side column can be installed at both sides, front or rear.
- Non-skid coated platforms and adjustable safety lock ladders.
- Optional caster kit for moving the lift around, and optional rolling jacks.
- *Rolling jacks and casters can be purchased separately but are not included. *
- Comes with two drip trays and a jack tray.
High-quality hydraulic system with 110V/60HZ/1PH or 220V/60HZ/1PH (Optional)
Customer must have forklift for unloading.
Specifications
| Lifting Capacity | 11000 lbs. (4990KG ) |
| Max. Lifting Height | 84.25″ / 2140mm |
| Lifting Time | 83s Up / 40s Down |
| Height of Posts | 94.88″ / 2410mm |
| Width Overall | 126″ / 3200mm |
| Length Overall | 229.73″ / 5835mm (with Ramps) |
| Inside Columns | 112.81″ / 2865mm |
| Min. Runway Height | 6.2″ / 157mm |
| Motor | 110VAC/60HZ/1PH |
| Net Weight | 2116lbs / 960KG |
ACCESSORIES
KT-RJ50
$959 – 5,000lb Rolling Jack for 4H110 and 4H850
KT-CR2
$450 – Caster Kit for 4H110 (Fits KT-4H110 lift Only)
KT-RJ70
$1,149 – 7,000 lb Rolling Jack for 4H110 and 4H850
220V Power Option
Change to 220V
Details On Freight
CLICK HERE for full details on equipment delivery options.
Your Auto Lift ships on a LTL common carrier freight company. It is taken to your location on a 48 foot semi truck. Please note the following before making your purchase:
- You are responsible for unloading the lift from the truck. The truck driver does not unload it for you.
- Lift Gate delivery service is not available for auto lifts.
- You cannot unload an auto lift from the truck by hand. You must have machinery that can lift the full weight on your auto lift for unloading from the truck. Fork Lift, Bobcat, Tractor, Tow Truck, Back Hoe are all good options.
- If you cannot unload from a truck, we can ship to our carrier's nearest freight terminal for you to pickup with a trailer or moving van.
- You are responsible for calling the freight company to make a delivery appointment. We don't know your schedule so we can't do this for you.
When your lift ships, we will email you the carrier information and tracking number. Freight shipping is slower than small package shipping and can take 3-14 days depending on your location so please be patient.