QuickJack BL-3500SLX Portable Car Lift
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Lift small-wheelbase vehicles with the BL-3500SLX portable car lift, built for 3,500-lbs. capacity, low-profile access and compact storage. It gives home garages, detailers and service shops a frame-engaging lift solution for lighter vehicles, making maintenance, inspections and wheel service easier without the permanent footprint of a traditional car lift.

Small Cars Get a Real Portable Lift, Not a Sketchy Shortcut

The QuickJack BL-3500SLX Portable Car Lift gives compact cars, lightweight sports cars, track cars, and smaller vehicles a faster, safer way to get off the ground. With a 3,500-lb. lifting capacity, about 21 inches of lift height, and a lift cycle under 30 seconds, it helps users move beyond ramps, floor jacks, and stands that never quite feel like enough. As the smallest and lightest frame assembly in the QuickJack lineup, the BL-3500SLX is built around portability. It can fit in many car trunks or backseats, making it a strong choice for home garages, mobile auto repair, race weekends, quick wheel service, and away-from-home tune-ups.
Lightweight Frames That Travel Where the Work Happens

The BL-3500SLX is designed to go places full-size lifts cannot. After the initial one-time assembly, setup is simple: position the frames, place the rubber blocks at the vehicle lift points, connect the power, and raise the vehicle. Its compact frame design makes it easy to store, transport, and use in tight spaces. Whether the job is in the garage, driveway, paddock, or pit area, this portable car lift gives smaller vehicles real lifting access without a permanent installation.
Low 3-Inch Profile for Low-Clearance Vehicles

A super-low 3-inch profile lets the BL-3500SLX slide under vehicles that can be difficult to reach with conventional jacks or ramps. That makes it especially useful for compact cars, lightweight sports cars, and vehicles where clearance is always part of the conversation. Because the independent frames do not use cross members, users can adjust platform spacing to fit a wide range of vehicles at or under the 3,500-lb. capacity rating. The open-center design also helps improve access for oil changes, inspections, exhaust work, brake service, and underbody maintenance.
Track-Friendly Lifting with Optional DC Power

The BL-3500SLX is a natural fit for racers and enthusiasts who need fast lifting away from home. Hundreds of QuickJack users rely on this kind of portable setup for wheel service, tune-ups, inspections, and trackside adjustments without dragging around full-size shop equipment. An optional DC power unit can connect the lift to a vehicle battery or portable battery pack, giving users more flexibility when a wall outlet is not available. For small cars and lightweight builds, the BL-3500SLX keeps lifting simple, fast, and portable.
Key Features
3,500-lb. Capacity
Built for compact cars, lightweight sports cars, and smaller vehicles that need fast portable lifting.
About 21-Inch Lift Height
Raises vehicles high enough for tire service, brake work, oil changes, inspections, and underbody access.
Under 30-Second Lift Cycle
Gets vehicles in the air quickly so users spend less time setting up and more time working.
3-Inch Low Profile
Slides under many low-clearance vehicles where ramps and traditional jacks can be frustrating.
Smallest QuickJack Frames
The lightest frame assembly in the lineup is easy to move, store, and transport.
Optional DC Power
Use an optional DC power unit with a vehicle battery or portable battery pack for track days and mobile work.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 3500 lb |
| RISE | |
| A Lowered Height with 2 Inch Block | 3.5 in |
| B Lifting Height with 2 Inch Block | 17.5 in |
| C Lifting Height with 3 Inch Block | 18.5 in |
| D Max Lifting Height | 21 in |
| Lifting Time | 30 seconds |
| LIFT POINT SPREAD | |
| G Min Lift Point Spread | 27 in |
| H Max Lift Point Spread | 50.5 in |
| FRAME DIMENSIONS | |
| I Frame Width Each | 10.5 in |
| J Frame Length Each | 62.5 in |
| Frame Weight Each | 60 lb |
| POWER UNIT AND VOLTAGE | |
| Horsepower | 2 HP |
| Sound Level | 70 dBA |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 14.5 x 70 x 5 in |
| Shipping Weight | 180 lb |
| Shipping Method | Parcel |