KATOOL KT-4H150 15,000lb 4-Post Alignment Lift (One 6k Rolling Jack Included)
Authorized Dealer
We are an authorized dealer for all KATOOL branded products.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Description
Heavy-Duty Vehicles Require Heavy-Duty Lifting -- The Katool KT-4H150 Delivers 15,000 lbs of Unmatched Strength
When you're lifting trucks, fleet vehicles, or anything that pushes past 12,000 lbs, most four-post lifts start looking undersized fast. You either end up maxing out the rated capacity on every job or paying for a commercial rack that eats half your shop floor. The KT-4H150 by Katool sits right in the sweet spot -- a true 15,000 lb rated capacity with CE certification at 115% dynamic and 150% static load testing, built for shops and serious home garages that need real headroom above 12K without jumping to an industrial-grade price tag.
This isn't just a bigger version of a lighter lift -- it's engineered differently. The safety system includes a single-point manual safety lock release with secondary backup locks, 12 lock positions every 4.7 inches for precise height control, and diamond-textured non-skid runways that keep heavy vehicles planted during loading. Lift time is 95 seconds up and 55 seconds down on 220V single-phase power, and the included pneumatic rolling jack lets you lift the axle or frame for wheels-off brake, tire, and suspension work without pulling the vehicle off the lift.
What sets the KT-4H150 apart from other 15K lifts is the alignment-ready runway setup. Rear roller plates (slip plates) are built into the runways, and optional front turntables can be added separately to complete a full 4-wheel alignment configuration. Overall length with ramps is 245.31 inches, overall width is 138.80 inches, and post height is 91.8 inches -- so measure your bay carefully before ordering. The rolling jack requires external air supply. If you need a lift that handles the heaviest vehicles in your rotation and doubles as an alignment platform, this is the one that checks every box.
Benefits of the Katool KT-4H150
Superior Safety
Single-point manual lock release with secondary backup, 12 lock positions, and non-skid diamond-plate runways.
15,000 lb Capacity
Handles heavy-duty trucks, fleet vehicles, and large SUVs without pushing the rated limits on every job.
Alignment-Ready
Rear slip plates built into the runways. Add optional front turntables for a complete 4-wheel alignment setup.
Rolling Jack Included
Pneumatic rolling jack ships with the lift for wheels-off brake, tire, and suspension service without a second lift.
Heavy-Duty Build
4,850 lb net weight with high-gauge steel construction and a 3-year structural warranty for long-term reliability.
Adjustable Height
12 lock positions every 4.7 inches let you dial in the exact working height for any vehicle or task.
Key Features of the Katool 4H150 15,000lb Four-Post Vehicle Lift You'll Love:
• 15,000 lb Drive-On Capacity: Rated for 15,000 lbs with CE certification at 115% dynamic and 150% static load testing. This lift handles the heaviest vehicles most shops encounter -- full-size trucks, heavy SUVs, fleet vans, and duallys -- without running near the ceiling of the rating on every job. That margin matters for safety and long-term structural integrity.
• Built-In Rear Slip Plates + Optional Front Turntables: Rear roller plates are integrated directly into the runways, so you're already set up for rear-wheel alignment adjustments out of the box. Front turntables can be added separately to complete a professional 4-wheel alignment configuration. This saves you from buying a separate alignment rack for most alignment work.
• Pneumatic Rolling Jack Included: The included rolling jack lets you lift the axle or frame so wheels hang free for brake jobs, tire rotations, suspension work, and more -- all without pulling the vehicle off the lift. Requires an external air supply. Most competitors at this capacity either don't include a rolling jack or charge extra for it.
• 12-Position Adjustable Lock Ladder: Locks engage every 4.7 inches, giving you precise height control for different vehicles and tasks. The single-point manual safety lock release lets you disengage all locks from one location, and a secondary backup lock provides an extra layer of protection against unexpected failures.
• 220V Single-Phase Power: Runs on 220V/60Hz single-phase power -- this is the only voltage option on this model. Lift cycle is 95 seconds up and 55 seconds down. The slower, more controlled cycle is intentional at this weight class -- you want predictable, steady movement when you're raising 15,000 lbs overhead.
• Free-Standing Design: Engineered for free-standing use without bolting to the floor. No anchor bolts required for normal operation. However, the concrete requirements on this model are higher than lighter lifts -- minimum 5.9 inches (150 mm) thickness at 3,000 PSI compressive strength. Verify your slab before ordering.
Minimum Garage Requirements
✔ Ceiling Height: At least 97" (8'1") recommended ✔ Floor Space: 246" L x 139" W (20'6" x 11'7") ✔ Concrete Thickness: Minimum 5.9" (150 mm) ✔ Concrete Strength: Minimum 3,000 PSI compressive ✔ Electrical: 220V single-phase, 30A breaker, 10-gauge wire ✔ Post Height: 91.8" (7'8") -- measure before ordering
*This lift is designed for free-standing use and does not require bolting to the ground for normal operation. Regardless of whether the lift is anchored, it must be installed on a concrete surface that meets the manufacturer's minimum requirements of at least 5.9" (150 mm) thickness and 3,000 PSI compressive strength. Installing this lift on inadequate concrete may result in serious injury or death. It is the customer's responsibility to verify concrete thickness and strength prior to purchase and installation.
| Katool 4H150 15,000 lb Four-Post Alignment Lift Specifications | |
| Manufacturer | Katool |
| Lifting Capacity | 15,000 lbs |
| Max. Lifting Height | 75" (1,905 mm) |
| Lifting Time | 95 seconds up / 55 seconds down |
| Lock Positions | 12 positions, every 4.7" |
| Height of Posts | 91.8" (2,332 mm) |
| Width Overall | 138.80" (3,525 mm) |
| Width Between Columns | 118.11" (3,000 mm) |
| Runway Width (each) | 20.9" (530 mm) |
| Width Between Runways | 39.4" (1,000 mm) |
| Overall Length (without ramps) | 208" (5,283 mm) |
| Overall Length (with ramps) | 245.31" (6,231 mm) |
| Min. Runway Height | 9.3" (236 mm) |
| Pad Size | 14.56" x 17.12" |
| Runway Features | Rear slip plates integrated; front turntables sold separately |
| Rolling Jack | Included pneumatic rolling jack (requires external air supply) |
| Motor | 220V/60Hz/1PH |
| Electrical Requirements | Dedicated circuit, 10-gauge wire, 30-amp breaker (220V only) |
| Oil Requirement | AW-46 or AW-32 (colder climates) |
| Concrete Requirement | 5.9" (150 mm) minimum @ 3,000 PSI |
| Net Weight | 4,850 lbs (2,200 kg) |
| Shipping Dimensions | Lift: 4,057 lbs -- 200 x 27 x 33" Pump: 441 lbs -- 40 x 24 x 15" Ramps (x2): 66 lbs -- 47 x 20 x 12" Rolling Jack: 330 lbs -- 46 x 25 x 13" |
| Warranty | 1 Year limited parts & defects | 3 Year structural |
