BendPak PL-6000DC - 6,000 lb. Capacity / Two-Post Parking Lift / Shared Columns
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Create efficient vehicle storage with the PL6000DC two-post parking lift, a 6,000-lbs. capacity shared-column system designed for space-conscious layouts. Built for garages, storage facilities and commercial parking applications, it helps add practical vehicle storage without the footprint of traditional parking equipment while keeping access organized and efficient.
Double Your Parking Without Doubling the Footprint
The BendPak PL6000DC Two-Post Parking Lift is built for facilities that need more parking capacity without wasting valuable floor space. With a 6,000-lb. capacity and a dual-column, shared-column design, it gives operators a practical way to stack vehicles for long-term storage above and short-term access below. Designed for real estate developers, architects, engineers, automotive dealers, commercial parking operators, and serious vehicle storage environments, the PL6000DC fits inside a typical 8-foot parking space and accommodates most cars and light trucks. It is engineered for both indoor and outdoor installations, giving facilities more ways to make limited parking areas work harder.
Shared Columns Turn Tight Parking Areas Into Real Capacity
The PL6000DC uses a ganged column design that allows multiple installations in minimum space. Posts can be shared between units, helping reduce cost and improve parking density when multiple lifts are installed side by side. That shared-column architecture is what makes the PL6000DC so useful for commercial parking layouts. Instead of adding more land, more structure, or more frustration, facilities can add vertical capacity within a smarter lift footprint.
Low Operating Cost and Dependable Hydraulic Operation
The PL6000DC is designed with operating efficiency in mind. When lowering, the platform is gravity-driven, which means no electric motor consumption is required during descent. That helps reduce operating costs over time, especially in parking environments where lifts may be used frequently. A single direct-drive hydraulic cylinder eliminates the need for screw mechanisms and supports smoother operation, better reliability, and lower maintenance costs. The overhead power unit provides smooth and quiet hydraulic performance, while compact packaging and detailed installation documentation help simplify setup and handling.
Safety Systems That Keep the Platform Under Control
Automatic load-holding devices engage and lock the lift structure as the PL6000DC raises, helping prevent sudden free fall in the unlikely event of suspension component failure. Once the platform reaches the desired height, operators can lower it onto the locks to minimize wear on suspension components and keep the lift securely supported. The PL6000DC also includes an electric key switch, automatic shut-off when the key is released, emergency stop button, upper limit switch, hydraulic overloading protection, pressure relief valve, pressure-compensated flow control valve, and mechanical safety locks spaced every 4 inches. That is the kind of control a parking lift needs when it is holding a vehicle above another one.
Specifications (Imperial)
| STYLE | |
| Style | Two-Post Parking Lift |
| Number of Platforms | 1 |
| CAPACITY | |
| Lifting Capacity | 6000 lb |
| RISE AND LOCKING | |
| Max Lifting Height | 82.5 in |
| Lock Release | Manual Release |
| Lifting Time | 60 seconds |
| OVERALL DIMENSIONS | |
| Width | 100.25 in |
| Length | 163.5 in |
| Height | 131 in |
| PLATFORM AND RUNWAYS | |
| Platform Width | 82.5 in |
| Platform Length | 157 in |
| POWER AND CONTROLS | |
| Voltage | 208-240V / 50/60 Hz / 1-Phase |
| Amperage | 22 Amps |
| Sound Level | 52 dB |
| SHIPPING AND DELIVERY | |
| Shipping Method | Flatbed |
| Offload Requirement | Forklift |
