BendPak HD-9STX - 9,000-lb. Capacity / Narrow Width / High Lift
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Gain extra vertical clearance in a tighter footprint with the HD-9STX narrow-width high-lift four-post lift. Rated at 9,000-lbs. capacity, this car lift gives garages and service bays more room under the vehicle while keeping the overall width more compact than standard models. It is a smart fit for vehicle storage, maintenance and applications where height matters but available floor space is limited.
High-Rise Clearance in a Narrow Four-Post Footprint
The BendPak HD-9STX Four-Post Lift takes the narrow-width advantage of the HD-9ST and adds high-rise capability for garages and shops that need more vertical clearance without giving up floor space. With a 9,000-lb. lifting capacity, narrow footprint, and taller lift profile, the HD-9STX is built for vehicle storage, maintenance, and parking setups where height matters as much as width. This is the model for users who want compact floor coverage but need room below the runways for trucks, SUVs, or more comfortable underbody service. It is ideal for high-ceiling home garages, compact service areas, and vehicle storage spaces where a standard-width lift would eat up too much bay space.
High-Rise Parking Lift That Keeps the Floor Plan Lean
The HD-9STX is made for owners who need to stack smarter. Its high-rise design creates more clearance beneath the raised vehicle, making it easier to park taller vehicles underneath and reducing the compromises that come with lower-profile storage lifts. The narrow-width layout keeps the footprint manageable, while the extra height helps users avoid stooping, crouching, and awkward service positions. For oil changes, transmission work, exhaust service, and general inspection access, the HD-9STX makes compact lifting feel less cramped.
Built Around BendPak’s Proven HD-9 Safety Systems
Like the rest of the HD-9 family, the HD-9STX uses an electric / hydraulic power system, a single hydraulic cylinder mounted beneath the runway, fully enclosed lifting cables, internal anti-sway slider blocks, and oversized self-lubricating cable rollers. Multi-position safety locks, adjustable lock ladders, push-button pneumatic safety release, and independent backup slack-cable safety latches give the lift the safety structure needed for serious parking and service use.
Accessory-Ready Four-Post Lift for Parking, Storage, and Service
The HD-9STX supports optional accessories that let users tailor the lift to the way they work. Available options include casters, drip trays, jack platforms, solid decks, drive-thru ramps, and compatible rolling bridge jacks. That flexibility matters because the HD-9STX is not just a taller parking lift. It is a compact high-rise four-post lift that can adapt to vehicle storage, garage organization, and regular maintenance work without pretending one setup fits every user.
Key Features
Narrow High-Rise Design
The HD-9STX combines a space-saving narrow footprint with extra lifting height for garages that have vertical room but limited floor width.
9,000-lb. Capacity
Built for vehicles up to 9,000 lbs., this high-rise four-post lift supports parking, storage, and maintenance tasks.
Better Lower-Level Clearance
The high-rise layout helps fit trucks and SUVs beneath the raised runways for more flexible vehicle storage.
Comfortable Service Height
Extra rise reduces stooping and awkward underbody access during oil changes, exhaust service, and transmission work.
Protected Lift Components
Cables, locks, sheaves, and safety systems are enclosed inside the lift structure for cleaner, safer operation.
Optional Accessories
Caster kits, drip trays, solid decks, drive-thru ramps, jack platforms, and rolling bridge jacks can expand how the lift is used.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 9000 lb |
| RISE | |
| A Min Runway Height | 5 in |
| B Max Rise | 82 in |
| C Max Lifting Height | 86.5 in |
| OUTSIDE DIMENSIONS | |
| D Width | 100.25 in |
| E Outside Length | 198 in |
| F Overall Length | 224 in |
| G Height | 100 in |
| INSIDE DIMENSIONS | |
| H Inside Columns | 89.75 in |
| I Drive-Thru Clearance | 76.5 in |
| RUNWAYS | |
| J Runway Width | 19 in |
| K Runway Length | 188 in |
| L Width Between Runways | 37.5 in |
| M Runway Centerline | 56.5 in |
| N Outside Edge of Runways | 75.5 in |
| MINIMUM WHEELBASE | |
| Rated Wheelbase Capacity | 115 in |
| 25% Capacity | 80 in |
| 50% Capacity | 95 in |
| 75% Capacity | 115 in |
| LOCKING | |
| Locking Positions | 15 |
| Locking Spacing | 4 in |
| POWER UNIT AND VOLTAGE | |
| Horsepower | 2 HP |
| Voltage | 208-230V / 60 Hz / 1-Phase |
| Sound Level | 45 dB |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 22 x 192 x 34 in |
| Shipping Weight | 1842 lb |
| Shipping Method | Flatbed |
| Offload Requirement | Forklift |
