8000TLX Portable Truck Lift Bundle
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
For longer trucks, SUVs and vehicles with wider lift point spreads, the 8000TLX extended portable car lift adds extra frame reach with 8,000-lbs. capacity. It gives garages and shops a stronger, more flexible lifting solution for larger vehicles while maintaining QuickJack's portable setup, compact stowed storage and open-center access for real service work.
Big Trucks Get the Long-Reach QuickJack Treatment
The QuickJack 8000TLX Extended Portable Truck Lift is built for the big jobs that need both reach and strength. With an 8,000-lb. capacity, extended 76-inch frames, and up to a 66-inch lift point reach, the 8000TLX is engineered for heavy-duty trucks, SUVs, long-wheelbase vehicles, and specialty sedans that standard portable lifts cannot properly cover. This is the highest-capacity extended-length portable lift in the QuickJack lineup, giving users the ability to lift larger vehicles without committing to a permanent garage lift. It still reaches max rise in about 30 seconds, collapses to a low 3.5-inch profile, and gives home garages, shops, driveways, and off-site work areas serious lifting power in a fully portable package.
Extended-Length Power for Wide Lift Point Spreads
The 8000TLX was designed for vehicles with lift points that stretch beyond the reach of standard-length TL frames. Its TLX frame layout adds the extra length needed for long wheelbases, with a 43-inch minimum lift point spread, 66-inch maximum lift point spread, and 76-inch overall frame length. That longer frame geometry makes the 8000TLX a strong choice for trucks, SUVs, and larger vehicles that need a more generous lift point range. For users stepping up from standard portable car lifts, this model delivers the extra reach needed for heavier and longer vehicles while keeping the open-center access QuickJack is known for.
Synchronized Hydraulics Built for Heavier Vehicles
The redesigned hydraulic system uses a pressure-compensated flow divider and independent shut-off solenoids to help both frames rise and lower in sync. That balanced movement is especially important when lifting heavier vehicles, where controlled frame travel and stable operation matter every time. Factory preassembled hydraulics help simplify setup, reduce connection headaches, and get the lift ready faster. Reinforced frame geometry, thicker cross members, improved welds, and enhanced pivot joints give the 8000TLX the rigidity needed for repeated use under higher loads.
Portable Truck Lift Strength Without Giving Up Floor Space
Despite its size and capacity, the 8000TLX remains a collapsible portable lift that can be rolled, moved, and stored using the built-in urethane wheels. It gives truck and SUV owners a powerful alternative to permanent lifts, especially in garages or shops where floor space has to stay flexible. The optional Truck and SUV Adapter Kit adds more undercarriage access for higher-clearance vehicles, making the 8000TLX even more useful for large daily drivers, work trucks, and weekend projects. It is the long-reach QuickJack for people who need portable lifting power that does not tap out when the vehicle gets big.
Key Features
8,000-lb. Lifting Capacity
Built for larger SUVs, trucks, and long-wheelbase vehicles that need more strength than lighter portable lift models can offer.
Extended 76-Inch Frames
The TLX frame length provides a 66-inch max lift point spread for vehicles with wider manufacturer-recommended lift points.
About 30-Second Lift Cycle
Reaches max rise in about 30 seconds, helping speed up tire service, maintenance, inspections, and garage work.
Synchronized Hydraulic System
A pressure-compensated flow divider and independent shut-off solenoids help both frames lift and lower in sync.
Factory Preassembled Hydraulics
Ships with the hydraulic system preassembled to reduce setup time and get users lifting faster.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 8000 lb |
| RISE | |
| A Lowered Height with 2 Inch Block | 3.5 in |
| B Lifting Height with 2 Inch Block | 21 in |
| C Lifting Height with 3 Inch Block | 22 in |
| D Max Lifting Height | 22 in |
| E Lift Height with Adapters | 24 in |
| F Lift Height with Adapters and Pin | 26.75 in |
| Lifting Time | 30 seconds |
| LIFT POINT SPREAD | |
| G Min Lift Point Spread | 43 in |
| H Max Lift Point Spread | 66 in |
| FRAME DIMENSIONS | |
| I Frame Width Each | 11 in |
| J Frame Length Each | 76 in |
| Frame Weight Each | 103 lb |
| POWER UNIT AND VOLTAGE | |
| Horsepower | 2 HP |
| Sound Level | 70 dBA |
| SHIPPING AND DELIVERY | |
| Shipping Method | LTL |
| Offload Requirement | Liftgate |
