BendPak 10APX Pro Series Two Post Car Lift - 10,000-Lb Capacity - High Rise
10APX PRO – The Future of Two-Post Lifting
The 10APX PRO-Series two-post lift is designed for mechanics who constantly deal with working in uncomfortable positions. This lift offers a lifting height of 79.5” and an overhead beam of 157”, with a 10,000-lb. lifting capacity, Low-Pro arms, Bi-Metric™ arms, and more.
BendPak's PRO Series combines the finest qualities of today's lifts into a new car lift engineering concept, purposefully designed for extreme use, high loads, and unmatched operator safety and efficiency.
Revolutionary Automatic Swing Arm Restraint System
The PRO-Series' ASARS features a complete 360-degree load-holding grip with a heavily forged-steel design that delivers over 2000 pounds of load-holding force, ensuring secure arm placement and preventing unintended movement during lift use and vehicle servicing.
Low-Pro™ Swing Arms
BendPak's exclusive Low-Pro™ swing arms incorporate telescoping channels with a lowered profile and dropped-end pad receivers for easier access to lift points on lowered chassis-height vehicles.
The Perfect Air Supply for Your Lift
The BendPak WSA-100 Work Station integrates air and electric capabilities into your two-post or four-post lift, with four electrical outlets and two specialized air service outlets with an integrated filtration system.
Specifications
| Lifting Capacity | 10,000 lbs. (4,536 kg) |
| Max Capacity / Front Axle | 5,000 lbs. (2,268 kg) |
| Max Capacity / Rear Axle | 5,000 lbs. (2,268 kg) |
| A - Rise | 75" (1,905 mm) |
| B - Rise + Pad Only | 79.5" (2,007 mm) |
| C - Rise + Pad + 63 mm Adapter | 89" (2,261 mm) |
| D - Min. Height + Pad | 4" (102 mm) |
| Time to Full Rise | 45 seconds |
| E - Height Overall | 157" (3,988 mm) |
| F - Width Overall | 135" (3,429 mm) or 145" (3,683 mm) |
| G - Outside Columns | 127" (3,226 mm) or 137" (3,480 mm) |
| H - Inside Columns | 108.25" (2,750 mm) or 118.25" (3,004 mm) |
| I - Drive-Thru Clearance | 92" (2,337 mm) or 102" (2,591 mm) |
| J - Floor To Overhead Switch | 151.5" (3,848 mm) |
| K - Front Arm Reach (Min) | 22" (559 mm) |
| K - Front Arm Reach (Max) | 47.5" (1,207 mm) |
| L - Rear Arm Reach (Min) | 29.5" (749 mm) |
| L - Rear Arm Reach (Max) | 57" (1,448 mm) |
| Screw Pad Adjustment | 2" (51 mm) |
| Max Load Per Arm | 2,500 lbs. (1,134 kg) |
| Motor | 220 VAC, 60 Hz, 1 Phase |
| Noise | <70 dB |
