BendPak PL-12000DPS - 12,000 lb. Capacity / Tandem Parking Lift / Independent Platforms / Standard Rise
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Store vehicles side by side in a more efficient footprint with the PL-12000DPS wide tandem parking lift. Built with 12,000-lbs. total capacity, wide platforms and standard-rise configuration, it helps garages, storage facilities and commercial parking operations increase vehicle capacity while keeping access organized, practical and easier to manage than crowded floor parking.
Two Parking Spaces Start Pulling Double Duty
The BendPak PL-12000DPS wide standard tandem parking lift is made for users who need to store more vehicles without adding more building space. With two independent platforms and 12,000 lbs. of total lifting capacity, this parking lift helps commercial garages, residential collections, dealerships, and storage facilities create additional vehicle capacity inside the footprint they already have. The wide standard configuration gives drivers more room while still delivering the space-saving logic of a tandem parking system. For facilities challenged by too many cars and not enough stalls, the PL-12000DPS turns everyday parking space into a smarter, more valuable storage asset.
Independent Platforms Keep Access Simple
Each platform on the PL-12000DPS operates independently, so one vehicle can be lowered while the other side remains parked. This eliminates the need to shuffle vehicles from the opposite side of the lift just to access a single stored vehicle. That independent operation makes a major difference in busy parking environments where different vehicles may be accessed at different times. It gives owners and operators more control, less disruption, and a cleaner workflow for cars, light trucks, motorcycles, and ATVs.
Wide Standard Storage with BendPak Parking-Lift Engineering
The PL-12000DPS is designed to increase parking density while keeping the system practical for everyday use. Full-width platforms help protect vehicles stored underneath, while the wide platform layout gives users a confident drive-on experience for standard parking applications. Heavy-duty steel construction, multiple lock positions, wide baseplates, built-in wheel stops, front and rear wheel chocks, and a durable powder-coat superstructure help make the PL-12000DPS a serious long-term storage solution. It is built for facilities that need more parking capacity without turning every vehicle move into a full production.
Dual Power Units and Hydraulic Muscle for Daily Parking Use
The PL-12000DPS uses dual hydraulic cylinders with heavy-duty galvanized lifting cables and dual electric-hydraulic power units to support dependable lifting performance. High-speed lifting helps keep operation efficient, while multiple locks allow multi-height parked settings for greater flexibility. Lightweight extended aluminum approach ramps can be stowed when not in use, helping reduce clutter around the lift. For users looking for a wide standard tandem parking lift with independent platforms and proven BendPak parking-system engineering, the PL-12000DPS is built to add serious value to limited space.
Key Features
Wide Standard Layout
A wide standard platform design gives users a confident tandem parking setup for everyday vehicle storage.
Independent Platforms
One platform can lower while the other stays parked, reducing unnecessary vehicle movement.
12,000-lb. Total Capacity
Each side supports up to 6,000 lbs. for practical storage of cars, light trucks, motorcycles, and ATVs.
Full-Width Protection
Full-width platforms help shield the vehicles parked below and create a more complete parking surface.
Dual Hydraulic Power
Dual cylinders, galvanized cables, and dual electric-hydraulic power units support dependable lifting.
Specifications (Imperial)
| STYLE | |
| Style | Multi-Platform Parking Lift |
| Number of Platforms | 2 |
| CAPACITY | |
| Load Capacity per Platform | 6000 lb |
| RISE AND LOCKING | |
| Max Rise | 70 in |
| Max Lifting Height | 74.75 in |
| Locking Positions | 6 |
| Locking Spacing | 4.25 in |
| Lock Release | Air Powered Release |
| Lifting Time | 60 seconds |
| OVERALL DIMENSIONS | |
| Width | 221.5 in |
| Length | 218.75 in |
| Height | 118.5 in |
| Outside Length | 174 in |
| INSIDE CLEARANCE | |
| Drive-Thru Width | 85 in |
| Drive-Thru Height | 68.5 in |
| Inside Columns | 100.25 in |
| PLATFORM AND RUNWAYS | |
| Runway Width | 19 in |
| Runway Length | 159 in |
| Runway Height | 4.75 in |
| Width Between Runways | 35 - 41 in |
| Outside Edge of Runways | 76 - 82 in |
| POWER AND CONTROLS | |
| Voltage | 208-240V / 50/60 Hz / 1-Phase |
| Amperage | 22 Amps |
| Sound Level | 52 dB |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 47 x 166 x 29 in |
| Shipping Weight | 4396 lb |
| Shipping Method | Flatbed |
| Offload Requirement | Forklift |
