Skip to content
🏠 Family-Owned & Operated | 🇺🇸 American-Run & No Call Centers | About Us ->
🏠 Family-Owned & Operated | 🇺🇸 American-Run & No Call Centers | About Us ->

BendPak HD-973PX - 9,000 and 7,000 Lb. Capacity / Tri-Level Parking Lift / Extended / High Lift

by BendPak
SKU 5175267

FREE SHIPPING

To commercial locations with a forklift for unloading.

Original price $23,495.00 - Original price $23,495.00
Original price
$23,495.00
$23,495.00 - $23,495.00
Current price $23,495.00
$23,495.00
Request a quote
Equipment Delivery Options

At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.

I have the equipment to unload my order

Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.

What to keep in mind when choosing this option:

  • The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
  • Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
  • You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
  • Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
  • There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.

In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.


Pick up at one of our warehouses

Do you have a hitch trailer to transport your lift? If so, then this might be the best option.

What to keep in mind when choosing this option:

  • Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
  • Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.

Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.


Dock Hold from LTL Carrier

Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.

You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.


Ship directly to a local installer

Neither of the above delivery options suits you? Then we have the solution.

We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.

What to keep in mind when choosing this option:

  • You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
  • We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)

Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.

Returns & Refunds

CANCELLATIONS

We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.

RETURNS

Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.

ADDITIONAL WARRANTY INFO

For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.

Create extra vehicle storage with the HD-973PX tri-level parking lift, an extended model built for 9,000-lbs. lower platform capacity and 7,000-lbs. upper platform capacity. The extended configuration helps support longer vehicles while the three-level design makes better use of vertical space. It is a strong fit for commercial storage, high-density parking, collectors and facilities that need more capacity without expanding floor space.

Longer, Taller and Ready to Stack Three

Longer, Taller and Ready to Stack Three

The BendPak HD-973PX is the extended high-lift version of BendPak's tri-level four-post parking lift, built for owners who need to stack three vehicles while making room for longer and taller vehicle combinations. With a 7,000-lb. upper platform and a 9,000-lb. lower deck, this triple-stacker is designed for cars, SUVs and full-size trucks that need more vertical and runway space. Compared to the HD-973P, the HD-973PX adds overall height and runway length to support bigger vehicles without giving up the core parking advantage: three vehicles stored in a single footprint. For shops, storage facilities and serious garages, it is the step-up tri-level parking lift when standard-size triple stacking starts to feel tight.

More Height and More Runway for Bigger Vehicles

More Height and More Runway for Bigger Vehicles

The HD-973PX is built for drivers who do not want to play parking-lift Tetris with taller trucks, SUVs or longer vehicles. Its extended runway length and added height create more usable clearance between decks, making it easier to fit larger vehicle combinations while maintaining the same tri-level storage concept. That extra space makes the HD-973PX a strong choice for professional storage, dealership environments, fleet support, private collections and garages where vehicle sizes vary. If the HD-973P is the compact triple-stack solution, the HD-973PX is the roomier version built for larger vehicles and more flexible parking arrangements.

Independent Platforms Keep Vehicle Access Flexible

Independent Platforms Keep Vehicle Access Flexible

The HD-973PX features independently operated lifting platforms, allowing the upper and lower parking decks to move separately. This avoids the limitation of tethered systems where both decks move together and forces fixed spacing between stored vehicles. With independent platform control, operators can lower the second-level parking deck without moving the upper vehicle. That makes vehicle rotation faster, cleaner and more convenient, especially in facilities where different vehicles need access at different times.

Safety Systems That Belong Under Expensive Vehicles

Safety Systems That Belong Under Expensive Vehicles

The HD-973PX uses multi-position safety locks spaced closely to support a wide range of parking height arrangements. Redundant anti-fall, spring-loaded safety catches help halt downward movement in the unlikely event of cable failure, while independent backup slack-cable latches and a padded trip bar with limit switch add further protection. Heavy-duty welded-steel construction, aluminum platform decking, hydraulic cylinders, 3/8-inch lifting cables and a load-displacing base structure give the HD-973PX the strength needed for demanding parking applications. Optional drive-thru ramps and 4,500-lb. air-hydraulic rolling jacks are available for expanded workflow.

Key Features

Extended High-Lift Design

Extended High-Lift Design

The HD-973PX adds height and runway length over the HD-973P. It is built for longer and taller vehicles that need more space between levels.

Triple-Stack Capacity

Triple-Stack Capacity

Store three vehicles in a single parking footprint. The upper platform handles 7,000 lbs., while the lower deck supports 9,000 lbs.

Room for Trucks and SUVs

Room for Trucks and SUVs

The extended design is ideal for larger vehicles, including full-size trucks and SUVs. It gives users more vertical clearance and runway room.

Independent Platforms

Independent Platforms

Move one platform without disturbing the vehicle on the other level. That flexibility makes vehicle rotation more convenient.

Four-Inch Lock Spacing

Multi-position safety locks are spaced closely to support more parking height options. This helps adapt the lift to different vehicle combinations.

Heavy-Duty Lifting System

Hydraulic cylinders, high-strength cables and welded-steel construction support dependable tri-level lifting.

Specifications (Imperial)

STYLE
Style Multi-Level Parking Lift
Number of Platforms 2
CAPACITY
Top Platform Lifting Capacity 7000 lb
Bottom Platform Lifting Capacity 9000 lb
RISE AND LOCKING
Max Rise 82 in
Max Lifting Height 84.5 in
Locking Positions 16
Locking Spacing 4 in
Lock Release Air Powered Release
Lifting Time 60 seconds
OVERALL DIMENSIONS
Width 110.5 in
Length 252.25 in
Height of Columns 169.75 in
INSIDE CLEARANCE
Drive-Thru Clearance 86.5 in
Inside Columns 100 in
PLATFORM AND RUNWAYS
Runway Width 19 in
Runway Length 208.5 in
Width Between Runways 35 - 41 in
POWER AND CONTROLS
Voltage 208-240V / 50/60 Hz / 1-Phase
Amperage 22 Amps
Sound Level 52 dB
SHIPPING AND DELIVERY
Shipping Dimensions 48 x 201 x 31 in
Shipping Weight 5930 lb
Shipping Method Flatbed
Offload Requirement Forklift
Freight Shipping

To the continental USA

Need help?

Contact us for support today

Financing

Multiple great options available

40+ Locations

Nationwide