BendPak 20AP Super-Duty Two Post Car Lift - 20,000-Lb Capacity
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Maximum lifting power defines the BendPak 20AP, a 20,000-lbs. capacity two-post car lift built for heavy-duty service bays, fleet maintenance, and professional shops. Its direct-drive lifting system, adaptable clearfloor design, and rugged AP Series construction give technicians the strength, clearance, and control needed for trucks, vans, SUVs, commercial vehicles, and other large vehicles.
Maximum-Capacity Lifting for Heavy-Duty Bays
The BendPak 20AP Super-Duty Two-Post Car Lift is built for shops that need serious heavy-duty lifting strength in a clearfloor two-post format. With 20,000 lbs. of lifting capacity, this lift is designed for large trucks, commercial vehicles, fleet service, utility vehicles, and demanding repair environments where lighter-capacity lifts simply do not belong. Choose the 20AP when vehicle weight is the priority. It gives technicians the under-vehicle access of a two-post lift with the capacity needed for heavier service work, while BendPak engineering adds direct-drive hydraulic power, automatic arm restraints, safety locks, and heavy-duty construction for daily professional use.
20,000-lb. Lifting Power for Heavy-Duty Service Bays
The 20AP is the higher-capacity choice in this two-post group, built for service departments that regularly handle the kinds of vehicles that overwhelm smaller shop lifts. Its 20,000-lb. rating makes it a strong fit for commercial fleets, heavy pickups, work trucks, and other demanding applications. The adaptable clearfloor design keeps the bay open beneath the raised vehicle, giving technicians more room for oil drains, transmission jacks, support stands, and service equipment. It delivers heavy lifting capability without turning the workspace into an obstacle course.
Automatic Arm Restraints and Stable Service Positioning
On a lift this powerful, arm control matters. The 20AP uses automatic swing arm restraints to help maintain proper arm position during lifting and service, supporting safer operation as technicians work around large, heavy vehicles. Safety locks in each column, a single-point lock release, and a padded overhead safety shutoff bar help create a more efficient daily workflow. These systems work together to keep lift operation controlled while still allowing technicians to move quickly through service tasks.
Commercial-Grade Construction with Direct-Drive Hydraulics
Dual hydraulic direct-drive cylinders provide smooth, powerful lifting without relying on chain-over-roller lifting. Heavy-duty columns, oversized carriages, self-lubricating load bearings, galvanized equalizing cables, and durable powder coat finish help the 20AP stand up to demanding commercial service environments. For shops that need the strongest standard-height AP Series two-post lift in this batch, the 20AP is the heavy hitter. It is built for facilities where big vehicles, serious capacity, and long-term durability are not optional.
Key Features
20,000-lb. Capacity
The 20AP is built for heavy vehicles that exceed the comfort zone of lighter two-post lifts. It is made for trucks, commercial vehicles, and fleet work.
Heavy-Duty Shop Focus
This lift is aimed at facilities where large vehicles are part of the daily workload. Capacity, stability, and access drive the design.
Clearfloor Service Access
The overhead configuration keeps the bay floor open. Technicians have more room to move tools, jacks, and service equipment beneath the vehicle.
Direct-Drive Hydraulics
Dual hydraulic direct-drive cylinders provide smooth lifting performance under heavy loads. The system is built for strength and long-term serviceability.
Automatic Arm Restraints
Arm restraints help maintain lift-arm position during service. That control is especially important with heavier vehicles and shifting balance points.
Commercial Construction
Oversized carriages, heavy-duty columns, durable finishes, and self-lubricating bearings help the 20AP stand up to demanding shop environments.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 20000 lb |
| Max Capacity Per Arm | 5000 lb |
| RISE | |
| A Rise | 76.25 in |
| C Max Lifting Height with Pad | 82.75 in |
| D Min Lifting Height with Pad | 8 in |
| Lifting Time | 79 seconds |
| OUTSIDE DIMENSIONS | |
| E Height | 169 in |
| F Width | 168 in |
| G Outside Columns | 149 in |
| INSIDE DIMENSIONS | |
| H Inside Columns | 126 in |
| I Drive-Thru Clearance | 107.75 in |
| J Floor to Overhead Switch | 162.5 in |
| ARMS AND PADS | |
| K Front Arm Reach Min | 35 in |
| K Front Arm Reach Max | 62 in |
| L Rear Arm Reach Min | 35 in |
| L Rear Arm Reach Max | 62 in |
| POWER UNIT AND VOLTAGE | |
| Horsepower | 5 HP |
| Voltage | 208-230V / 60 Hz / 1-Phase |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 32 x 187 x 40 in |
| Shipping Weight | 3522 lb |
| Shipping Method | Flatbed |
| Offload Requirement | Forklift |
