BendPak 12APX-192 Two Post Car Lift - 12,000-Lb Capacity - High Rise, 192" Extended Height
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Maximum overhead clearance meets 12,000-lbs. of lifting power in the BendPak 12APX-192 high-rise two-post car lift. With a 192-in. overall height, clearfloor design, Bi-Metric arms, Low-Pro arms, Automatic Swing Arm Restraint System, and advanced safety locks, the 12APX-192 is built for demanding service bays working on cars, trucks, SUVs, vans, and electric vehicles.
Extended-Height Reach for Taller Service Demands
The BendPak 12APX-192 takes the 12,000-lb. AP Series high-rise platform and adds extended 192-inch overall height for shops that need more overhead clearance. It is built for service bays that regularly handle taller trucks, vans, commercial vehicles, SUVs, and modern EV platforms where a standard overhead height can limit access or make positioning more difficult. This is the model to choose when the 12APX capacity and arm technology are right, but the bay needs more vertical room. The clearfloor design keeps the workspace open, while Bi-Metric™ lifting, Low-Pro™ triple-telescoping arms, double-telescoping screw pads, and ASARS arm restraints help technicians service a wide range of vehicles with more control.
192-Inch Extended Height for More Overhead Clearance
The extended-height structure is the defining advantage of the 12APX-192. Its taller overhead layout gives technicians more room around raised vehicles and helps accommodate high-roof vehicles that can feel cramped under shorter two-post lift configurations. For shops planning around trucks, vans, fleet vehicles, work vehicles, and EVs, the added height gives the bay more long-term flexibility. It preserves the 12,000-lb. lifting capacity and AP Series features while improving clearance for the kinds of vehicles that keep getting taller and heavier.
ASARS, Low-Pro™ Arms, and Modern Lift-Point Access
BendPak’s Automatic Swing Arm Restraint System helps secure arm position with a forged-steel, 360-degree gripping design that withstands more than 2,000 lbs. of side force. That added holding power is especially useful when vehicle balance changes during service or when technicians are working around larger, heavier platforms. Four triple-telescoping swing arms give the 12APX-192 more reach than conventional arm designs, while Low-Pro™ drop-end arms help access lower lifting points. Bi-Metric™ loading supports symmetric or asymmetric setup, allowing shops to adapt the lift to the vehicle instead of forcing every job into the same approach.
Clearfloor Service Bay with Direct-Drive Hydraulic Performance
Dual hydraulic direct-drive cylinders provide smooth lifting power, while safety locks in each column, single-point lock release, galvanized equalizing cables, and a padded overhead safety shutoff bar support daily shop confidence. Self-lubricating Dura-Glide UHMW load bearings reduce routine maintenance while helping the carriages move smoothly. With ALI certification, heavy-duty construction, durable powder coat finish, and the added reach of an extended-height overhead beam, the 12APX-192 is built for service departments that need a taller 12,000-lb. two-post lift without giving up clearfloor access or modern arm control.
Key Features
Extended 192-Inch Height
The taller overhead structure gives shops added clearance for trucks, vans, and high-roof vehicles. It is the key reason to choose the 12APX-192 over the standard 12APX.
12,000-lb. Lift Platform
Heavy-duty capacity supports a broad mix of trucks, SUVs, EVs, commercial vehicles, and passenger cars. It is built for serious professional service bays.
Tall Vehicle Focus
The added height helps reduce clearance limitations when lifting larger vehicles. Shops get more overhead room without moving to a different lift class.
ASARS Arm Restraints
Forged-steel restraints provide 360-degree arm control and more than 2,000 lbs. of side-force resistance. The system helps maintain arm position during service.
Low-Pro™ Arm Reach
Triple-telescoping Low-Pro™ arms provide a wide reach range for modern lift points. They help support lower vehicles and larger frame layouts.
Clearfloor Workflow
The overhead clearfloor layout keeps the bay open beneath the vehicle. Technicians can move tools, stands, and service equipment without a floorplate in the way.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 12000 lb |
| Max Capacity Per Arm | 3000 lb |
| RISE | |
| A Rise | 76 in |
| C Max Lifting Height with Pad | 79.25 in |
| D Min Lifting Height with Pad | 4.25 in |
| Lifting Time | 68 seconds |
| OUTSIDE DIMENSIONS | |
| E Height | 193 in |
| F Width | 156 in |
| G Outside Columns | 143 in |
| INSIDE DIMENSIONS | |
| H Inside Columns | 120 in |
| I Drive-Thru Clearance | 103 in |
| J Floor to Overhead Switch | 187.5 in |
| ARMS AND PADS | |
| K Front Arm Reach Min | 26 in |
| K Front Arm Reach Max | 55.25 in |
| L Rear Arm Reach Min | 29.25 in |
| L Rear Arm Reach Max | 60 in |
| POWER UNIT AND VOLTAGE | |
| Horsepower | 5 HP |
| Voltage | 208-230V / 60 Hz / 1-Phase |
| Sound Level | 81 dB |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 29 x 174 x 36 in |
| Shipping Weight | 2904 lb |
| Shipping Method | Flatbed |
| Offload Requirement | Forklift |
