BendPak 10AP-168 Pro Series Two Post Car Lift - 10,000-Lb Capacity - 168" Extended Height
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Built for shops that need added overhead clearance, the BendPak 10AP-168 delivers 10,000-lbs. of two-post lifting capacity with a 168-in. overall height. Advanced technology, premium-grade materials, and patented engineering give technicians more room to work comfortably and efficiently.
Extended-Height Flex for Taller Service Bays
The BendPak 10AP-168 Two-Post Car Lift gives professional shops the core AP Series lifting platform in a taller 168-inch overall height configuration. With 10,000 lbs. of lifting capacity, adaptable clearfloor installation, adjustable width, Low-Pro™ arms, Bi-Metric™ arm positioning, and advanced BendPak safety systems, the 10AP-168 is built for technicians who need more overhead clearance without stepping out of the 10AP family. This model is a strong choice for repair shops that service a wide mix of passenger vehicles, trucks, SUVs, EVs, and taller work. The expanded height gives mechanics more room to work comfortably while preserving the flexibility that makes the 10AP Series valuable: wide or narrow drive-thru setup, symmetric or asymmetric loading, triple-telescoping arms, and professional-grade frame engagement.
Automatic Swing Arm Restraints for Heavy Vehicle Service
The 10AP-168 uses BendPak’s Automatic Swing Arm Restraint System, or ASARS, to help prevent unplanned arm movement during lifting and service. This patented forged-steel system provides a full 360 degrees of load-holding grip and is engineered to withstand more than 2,000 lbs. of side force when vehicles shift or load balance changes during repair. That matters on modern vehicles, especially when technicians remove drivetrain components or service heavier EVs, trucks, vans, and SUVs. The system requires minimal operator involvement and includes a quick-release lever for fast arm adjustment, giving shops stronger arm control without slowing down the workflow.
Triple-Telescoping Low-Pro Arms for Better Lift-Point Access
Patented triple-telescoping nested swing arms give the 10AP-168 a wider reach range than traditional two-post lift arms. The arms retract shorter and extend farther, helping technicians reach factory lifting points on compact cars, larger vehicles, low-clearance platforms, and modern EV layouts with more precision. BendPak Low-Pro™ arm construction adds dropped-end pad receivers and shorter-profile telescoping channels for better access under lowered chassis-height vehicles. Combined with Bi-Metric™ arm geometry, the lift can support both symmetric and asymmetric loading, making one lift more useful across a broader vehicle mix.
Professional Lift Operation with Durable AP Series Engineering
The 10AP-168 is engineered for daily shop use with dual hydraulic direct-drive cylinders, an electric hydraulic HVLP power system, oversized tall carriages, self-lubricating Dura-Glide UHMW polyethylene bearings, and high-strength galvanized equalizing cables. Safety locks in each column are spaced every 3 inches, and the single-point safety release keeps descent control simple from the operator side. Double-telescoping screw pads with polyurethane contact surfaces help technicians level vehicles securely, while optional stackable adapters support additional pad height when needed. The durable powder coat finish, padded overhead shutoff bar, expandable top beam, and ALI certification round out a two-post lift built for serious professional service.
Key Features
168-Inch Overall Height
Extended overhead height gives technicians more room to work comfortably while keeping the 10AP platform, arm design, and safety systems intact.
10,000-lb. Capacity
Built for professional shops that service cars, trucks, SUVs, vans, and modern EVs within the rated lifting capacity.
ASARS Arm Restraints
The patented Automatic Swing Arm Restraint System provides 360-degree grip and more than 2,000 lbs. of side-force resistance.
Bi-Metric™ Arms
Symmetric and asymmetric loading capability helps shops adapt to different vehicle layouts without changing lift arms.
Low-Pro™ Arm Access
Dropped-end pad receivers and low-profile telescoping channels help reach lift points on lower chassis-height vehicles.
ALI Certified
Certified lift design supports professional shop confidence, safety expectations, and daily service reliability.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 10000 lb |
| Max Capacity Per Arm | 2500 lb |
| RISE | |
| A Rise | 69 in |
| B Rise + Pad | 73 in |
| D Min Lifting Height with Pad | 4 in |
| Lifting Time | 45 seconds |
| OUTSIDE DIMENSIONS | |
| E Height | 168 in |
| F Width | 135 - 145 in |
| G Outside Columns | 127.5 - 137.5 in |
| INSIDE DIMENSIONS | |
| H Inside Columns | 108.5 - 118.5 in |
| I Drive-Thru Clearance | 92 - 102 in |
| J Floor to Overhead Switch | 163.5 in |
| ARMS AND PADS | |
| K Front Arm Reach Min | 24.5 in |
| K Front Arm Reach Max | 50 in |
| L Rear Arm Reach Min | 32 in |
| L Rear Arm Reach Max | 59.25 in |
| Screw Pad Adjustment | 2 in |
| POWER UNIT AND VOLTAGE | |
| Horsepower | 5 HP |
| Voltage | 208-230V / 60 Hz / 1-Phase |
| Sound Level | < 70 dB |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 24 x 152 x 30 in |
| Shipping Weight | 1880 lb |
| Shipping Method | Flatbed |
| Offload Requirement | Forklift |
