BendPak MDS-6LPF - 6,000-lb. Capacity / Flush-Mount Open-Center Mid-Rise Scissor Lift
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Create a cleaner low-profile service bay with the MDS-6LPF flush-mount mid-rise scissor lift. Rated at 6,000-lb. capacity, this open-center car lift gives technicians useful access for tire, brake, suspension, body and general repair work while keeping the lift recessed when lowered. It is a practical choice for professional shops that want strong lifting performance with a more open floor layout.
Flush-Mount Mid-Rise Lifting That Disappears Into the Floor
The BendPak MDS-6LPF Flush-Mount Open-Center Mid-Rise Scissor Lift gives shops the same 6,000-lb. mid-rise capability as the MDS-6LP, but in a clean sub-surface installation that sits parallel with the floor when lowered. For lube shops, full-service bays, and home garages that want a zero-footprint lift, the MDS-6LPF keeps the bay open while still delivering serious service access. Its open-center layout, longer lifting platforms, and flush-mount design make it a strong choice for facilities that want mid-rise performance without a permanent obstacle on the shop floor. When installed in a pit or recessed bay, it can help create a smoother working area while preserving the lifting strength and safety features BendPak built into the MDS-6 platform.
Pneumatic Kick from Zero Footprint to Full Rise
The MDS-6LPF uses a pneumatic kicker to power the lift from its collapsed flush-mount position through the first stage of movement. That early boost helps overcome the mechanical disadvantage scissor lifts face at low height, giving the lift a stronger and more controlled start from the floor. Once the lift clears the initial rise, the hydraulic system takes over and raises the platforms to full working height in about 45 seconds. This makes the MDS-6LPF especially useful for shops that want the clean look of an in-ground installation without sacrificing mid-rise capability.
Four Hydraulic Cylinders for Balanced Platform Movement
Four hydraulic cylinders work together to raise the 6,000-lb. load evenly, while a flow divider helps maintain equal pressure through the system. The platforms rise and descend together throughout operation, giving technicians a stable base for vehicle service. Each platform features four solid steel scissor-frame support bars, and hinge points include Zerk grease fittings for simple lubrication at critical wear areas. The MDS-6LPF is built to handle daily service work while keeping maintenance practical.
Safety Locks, Contact Blocks, and Clean Shop Integration
Solid-steel safety lock bars engage automatically as the lift rises, giving operators three locking positions for different working heights. A push-button safety lock release system uses stainless-steel pneumatic cylinders to release the locks during descent without requiring manual release bars. Four cushioned-rubber contact blocks are included to support proper vehicle setup at manufacturer-recommended pick-up points. The flush-mount format, durable powder coat finish, and detailed installation guidance make the MDS-6LPF a professional mid-rise lift for shops that care about both access and floor space.
- Flush-Mount Design — Installs below the floor for a clean, zero-footprint lift area. The MDS-6LPF keeps the bay usable when the lift is lowered.
- 6,000-lb. Capacity — Provides serious mid-rise lifting strength for cars and light-duty vehicles. The flush-mount layout does not sacrifice capability.
- Pneumatic Kicker Assist — A pneumatic kick helps raise the lift from its collapsed position, improving the early lift phase from a flush floor start.
- Four Hydraulic Cylinders — Four cylinders and a flow divider help maintain balanced platform movement for smooth, level rise and descent.
- Three Lock Positions — Solid-steel safety locks engage automatically during ascent. Multiple working heights improve comfort and productivity.
- Push-Button Release — Stainless pneumatic cylinders release the locks during descent, keeping lock control away from the lift structure.
| Capacity | |
|---|---|
| Lifting Capacity | 6000 lb |
| Rise | |
| Max Lifting Height | 44 in |
| Max Lifting Height with Blocks | 38.5 in |
| Lowered Height | 5 in |
| Lifting Time | 35 seconds |
| Locking Heights | |
| 1st Locking Position | 24 in |
| 2nd Locking Position | 30 in |
| 3rd Locking Position | 35 in |
| 4th Locking Position | 39 in |
| Dimensions | |
| Pad Length | 67 in |
| Pad Width | 19 in |
| Length | 67 in |
| Width Between Platforms | 40 - 46 in |
| Power Unit and Voltage | |
| Horsepower | 1.5 HP |
| Voltage | 208-230V / 60 Hz / 1-Phase |
| Sound Level | 40 dBA |
| Shipping and Delivery | |
| Shipping Dimensions | 40.5 x 69.5 x 15.5 in |
| Shipping Weight | 1466 lb |
| Shipping Method | LTL |
| Offload Requirement | Liftgate |
