BendPak 9APF Open-Top Two-Post Lift for Low Ceilings - 9,000 lb Capacity
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Open-top lifting makes a real difference in low-ceiling shops, and the 9APF two-post lift is built exactly for that challenge. With 9,000-lbs. capacity, a floorplate design and triple-telescoping arms, it gives technicians AP-Series lifting capability without overhead obstructions, making it a smart fit for garages and service bays working around ceiling height limits.
Low Ceiling? Tall Vehicle? Problem Solved.
The BendPak 9APF is a 9,000-lb. open-top two-post lift built for shops that need real lifting capability in low-ceiling buildings. Instead of using an overhead beam, this floorplate lift keeps the upper area clear, making it a smart fit for older service bays, mixed-height shops, and spaces where tall vehicles, ladder racks, roof accessories, ducting, fans, or door tracks can create clearance headaches. The open-top layout gives technicians more room to work around cars, SUVs, light trucks, and taller vehicles without turning every lift setup into a ceiling-clearance negotiation. For shops that need a professional two-post lift but do not have the overhead space for a traditional clearfloor model, the 9APF delivers the AP Series arm engineering, safety systems, and low-ceiling practicality needed to turn limited bay space into productive service space.
Extra-Low Floorplate with Clean Line Routing
The 9APF uses an extra-low steel floorplate to cover the hydraulic hoses, equalizing cables, and safety cable routed between the posts. This keeps the bay cleaner, protects critical routing, and reduces the exposed clutter that can slow technicians down when moving oil drains, transmission jacks, tool carts, or creepers through the work area. Because the lift is designed around a floorplate layout, it gives shops low-ceiling flexibility without leaving service lines exposed across the bay. The result is a cleaner installation, better equipment movement, and a more practical work area for brake jobs, suspension work, drivetrain service, inspections, and everyday repair work.
AP-Series Arms for Modern Vehicle Lifting Points
The 9APF brings BendPak AP Series arm engineering to a lower-clearance floorplate platform. Triple-telescoping swing arms retract short for compact spotting and extend farther to reach a wider range of lifting points, while low-profile arm channels and dropped pad receivers help access lowered vehicles and hard-to-reach contact points. Bi-Metric arm geometry gives technicians the choice between symmetric and asymmetric spotting, so the same lift can support balanced service access or improved door clearance depending on the vehicle. Stackable adapters and cradle pads help accommodate trucks, SUVs, body-on-frame vehicles, and varied frame heights without resorting to sketchy setup tricks.
ASARS Safety and High-Cycle Shop Durability
Safety is a major part of the 9APF design. BendPak's Automatic Swing Arm Restraint System uses a forged-steel restraint with 360-degree grip to help keep the arms locked in position during service. Multiple safety-lock positions and single-point lock release add control during lifting and lowering, while dual hydraulic cylinders and heavy-duty equalizer cables support stable operation. The lift is built for day-to-day shop use with large steel base plates, single-piece columns, self-lubricating UHMW carriage sliders, oversized sheaves, and straightforward service access. For low-ceiling shops that need a serious two-post lift instead of a workaround, the 9APF is built to keep vehicles supported, technicians moving, and bays earning.
Key Features
Open-Top Clearance
No overhead beam means better clearance for tall vehicles, roof accessories, and low-ceiling shops. The 9APF helps turn difficult bay space into usable lifting space.
9,000-lb. Capacity
Built to handle cars, SUVs, and light trucks while staying practical for smaller or lower-clearance facilities.
Extra-Low Floorplate
The steel cover plate protects hydraulic hoses and equalizing cables while keeping the work area cleaner and easier to move through.
Triple-Telescoping Arms
AP Series arms retract short and extend farther to reach more lifting points across modern vehicle platforms.
Bi-Metric Spotting
Technicians can use symmetric or asymmetric arm positioning to balance access, door clearance, and vehicle support.
ASARS Arm Restraints
BendPak's Automatic Swing Arm Restraint System helps keep the arms locked in place with a forged-steel, 360-degree grip design.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 9000 lb |
| Max Capacity Per Arm | 2250 lb |
| RISE | |
| A Rise | 70 in |
| C Max Lifting Height with Pad | 73.5 in |
| D Min Lifting Height with Pad | 4.5 in |
| Lifting Time | 60 seconds |
| OUTSIDE DIMENSIONS | |
| E Height | 123 in |
| F Width | 136 - 146 in |
| G Outside Columns | 129.5 - 139.5 in |
| INSIDE DIMENSIONS | |
| H Inside Columns | 108.25 - 118.25 in |
| I Drive-Thru Clearance | 91 - 101 in |
| N Floorplate Height | 1.5 in |
| O Floorplate Width | 9.5 in |
| ARMS AND PADS | |
| K Front Arm Reach Min | 22.25 in |
| K Front Arm Reach Max | 47.5 in |
| L Rear Arm Reach Min | 29.5 in |
| L Rear Arm Reach Max | 57 in |
| Screw Pad Adjustment | 2.25 in |
| POWER UNIT AND VOLTAGE | |
| Horsepower | 5 HP |
| Voltage | 208-230V / 60 Hz / 1-Phase |
| Sound Level | < 85 dB |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 28 x 142 x 30 in |
| Shipping Weight | 1984 lb |
| Shipping Method | Flatbed |
| Offload Requirement | Forklift |
