BendPak 12APF Open-Top Two-Post Lift for Low Ceilings - 12,000 lb Capacity
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Open-top clearance and low-ceiling performance make the BendPak 12APF a practical choice for shops that need 12,000-lbs. of floorplate two-post lifting capacity. Its chain-over design, Bi-Metric arms, concealed hydraulics, and ASARS automatic arm restraint system provide the strength, safety, and flexibility needed for cars, trucks, SUVs, commercial vans, and lifted vehicles.
Open-Top Strength for Low-Ceiling Shops
The BendPak 12APF is a 12,000-lb. open-top two-post floorplate lift designed for shops that service heavier vehicles but cannot accommodate a traditional overhead lift. Shortened columns and an open-top architecture eliminate the overhead beam, giving commercial vans, high-roof vehicles, lifted trucks, SUVs, and work vehicles the vertical clearance they need in low-ceiling bays. This lift is built for repair shops, fleet service centers, tire facilities, dealerships, and independent garages that need more capacity without giving up ceiling clearance. It combines heavy-duty lifting strength, concealed floorplate routing, Bi-Metric arm flexibility, and BendPak AP Series safety systems in a package made for real commercial vehicle service.
Commercial Vehicle Access with Floorplate Simplicity
The 12APF uses a steel floorplate to protect hydraulic and equalizer lines between the posts, keeping the bay cleaner and reducing exposed routing across the work area. That matters in busy shops where jacks, drain pans, carts, creepers, and technicians are constantly moving around the lift. With no overhead obstruction, the 12APF is especially useful for work trucks, service vans, upfitted vehicles, ladder racks, high roofs, and larger SUVs. The open-top design gives tall vehicles room to clear while still providing the stable two-post access technicians need for brakes, suspension, wheels, drivetrain, and general service work.
Bi-Metric Arms and Adapter Coverage for Mixed Fleets
BendPak's Bi-Metric arm design gives technicians more flexibility when spotting vehicles. Symmetric positioning helps with balanced service access, while asymmetric spotting can improve door and cabin access during longer jobs. Drop-end arms create a lower pad height for low-profile vehicles, while included cradle pads and height adapters help accommodate trucks, vans, SUVs, and wider frame variations. That versatility is the point of the 12APF. It is not just a heavier-capacity lift with shorter columns. It is a mixed-fleet work tool designed to handle low vehicles, tall vehicles, commercial vehicles, and everyday service vehicles under one open-top platform.
ASARS Safety System and Heavy-Duty APF Construction
The 12APF includes BendPak's Automatic Swing Arm Restraint System with a forged-steel restraint, 360-degree holding grip, and over 2,000 pounds of holding force. Multiple safety lock positions, single-point safety release, and self-lubricating Dura-Glide bearings help technicians lift, lock, and lower with confidence. Single-piece columns, dual equalizer cables, oversized sheaves, and an electric-hydraulic power system support long-term performance in commercial environments. For shops that need low-ceiling installation flexibility with serious 12,000-lb. capability, the 12APF is built for strength, safety, and simpler day-to-day operation.
Key Features
12,000-lb. Capacity
Built for heavier trucks, vans, SUVs, and commercial vehicles that need real two-post lifting strength.
Open-Top Design
No overhead beam gives high-roof vehicles, ladder racks, and upfit equipment more room in low-ceiling bays.
Concealed Line Routing
The steel floorplate protects hydraulic and equalizer lines while helping keep the bay cleaner and easier to work through.
Bi-Metric Arm Setup
Use symmetric or asymmetric spotting to match the vehicle, the job, and the technician access needed.
Included Adapter Coverage
Drop-end arms, cradle pads, and height adapters help support low cars, SUVs, trucks, vans, and wider frame variations.
APF Safety Systems
ASARS arm restraints, multiple lock positions, and single-point release help keep lifting controlled and secure during service.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 12000 lb |
| Max Capacity Per Arm | 3000 lb |
| RISE | |
| A Rise | 70 in |
| C Max Lifting Height with Pad | 73.5 in |
| D Min Lifting Height with Pad | 4.5 in |
| Lifting Time | 68 seconds |
| OUTSIDE DIMENSIONS | |
| E Height | 144.75 in |
| F Width | 155 in |
| G Outside Columns | 142.25 in |
| INSIDE DIMENSIONS | |
| H Inside Columns | 119.13 in |
| I Drive-Thru Clearance | 102.25 in |
| N Floorplate Height | 1.5 in |
| O Floorplate Width | 9.5 in |
| ARMS AND PADS | |
| K Front Arm Reach Min | 26 in |
| K Front Arm Reach Max | 55.25 in |
| L Rear Arm Reach Min | 29.5 in |
| L Rear Arm Reach Max | 60 in |
| Screw Pad Adjustment | 2.25 in |
| POWER UNIT AND VOLTAGE | |
| Horsepower | 5 HP |
| Voltage | 208-230V / 60 Hz / 1-Phase |
| Sound Level | < 85 dB |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 30 x 164 x 33 in |
| Shipping Weight | 2738 lb |
| Shipping Method | Flatbed |
| Offload Requirement | Forklift |
