BendPak RJ9W 4-Post Rolling Bridge Jack – 9,000-lb. Capacity
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
For heavier trucks and SUVs on compatible four-post lifts, the BendPak RJ9W provides 9,000-lbs. of rolling bridge jack capacity. Easy-roll wheels help the jack move between the runways, while the added lifting capability gives technicians better access for tire, brake, suspension, and undercar service.
9,000-lb. Rolling Jack Strength for Heavier Lifted Loads
The BendPak RJ9W Rolling Bridge Jack is the heavier-duty choice in the RJW bridge jack family, giving compatible four-post lifts 9,000 lbs. of frame-engaging capacity for wheel-service work. It is built for situations where a vehicle may fit the lift capacity on paper, but its actual weight distribution demands a stronger bridge jack. That matters when vehicles approach the upper range of a lift's capacity or have offset centers of gravity. The RJ9W gives users more bridge jack capacity than the RJ7W, helping shops service heavier vehicles on compatible four-post lifts without immediately stepping into a completely different lift class.
Designed for Compatible 18,000-lb. and Higher Four-Post Lifts
The RJ9W is designed to fit inside the runway channels on standard four-post lift models rated at 18,000 lbs. capacity or greater. This places it above the RJ7W in the lineup and makes it a better fit for shops handling heavier vehicles, uneven axle loads, and more demanding four-post lift service requirements. If a vehicle's center of gravity or axle weight makes a lighter bridge jack the wrong tool, the RJ9W gives operators the extra headroom needed for safer, more appropriate lifting. It is a practical upgrade when the lift is still right for the job but the wheel-service jack needs more muscle.
Smooth Runway Travel with Pads and Adapters for Mixed Vehicles
Easy-Roll wheels come standard and move inside compatible lift runway channels for fast positioning. BendPak uses hardened stainless-steel, zinc-plated rollers to support durability, smooth movement, and long-term reliability in busy shop environments. Rubber contact pads help engage the vehicle undercarriage without scraping or marring contact points. Stackable adapters let users adjust pad height for vehicles with different front and rear suspension setups, which is especially useful when using two bridge jacks together and trying to maintain an even lift.
Pneumatic-Hydraulic Power and Three Comfortable Lock Heights
The RJ9W includes a pneumatic-hydraulic power unit attached to the jack, with no hydraulic sharing between the car lift and bridge jack. The air line connects directly to the bridge jack and requires 125 psi and 10 to 20 CFM, while foot-pedal control gives the operator convenient command over raising the jack. Three lock positions help users select the service height that feels right for the vehicle, the task, and the operator. Raise the four-post lift, set the bridge jack height, and get the clearance needed for wheel, brake, suspension, and undercarriage work on heavier vehicles.
Key Features
9,000-lb. Capacity
The RJ9W is the heavier-duty RJW bridge jack option for compatible four-post lift setups with demanding wheel-service needs.
For 18,000-lb. Lifts and Up
Designed for standard four-post lift models rated at 18,000 lbs. or greater, the RJ9W is built for larger lift platforms.
Offset Load Confidence
Extra bridge jack capacity helps when vehicles have uneven weight distribution or centers of gravity that make a lighter jack unsuitable.
Easy-Roll Positioning
Hardened stainless-steel, zinc-plated rollers help the jack travel smoothly through compatible runway channels.
Stackable Pad Height
Adapters can be stacked or removed to help match different suspension heights and maintain a more controlled lift.
Separate Air-Hydraulic System
The RJ9W operates from its own pneumatic-hydraulic power unit, keeping jack control independent from the four-post lift.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 9000 lb |
| HEIGHT | |
| Pad Only | 5.25 - 16.25 in |
| Pad + 2.75 Inch Adapter | 8 - 19 in |
| Pad + 5.5 Inch Adapter | 10.75 - 21.75 in |
| REACH | |
| Support Base Width | 45 - 50 in |
| Arm Reach | 42 - 56 in |
| PERFORMANCE | |
| Lifting Time | 55 seconds |
| Pump | Air/Hydraulic |
| Air Pressure | 125 PSI |
| Max Operating Hydraulic Pressure | 5,020 PSI |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 25 x 47 x 15 in |
| Shipping Weight | 478 lb |
| Shipping Method | LTL |
| Offload Requirement | Liftgate |
