BendPak RJ45W 4-Post Rolling Bridge Jack – 4,500-lb. Capacity
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
HD-9 series lift owners can add serious service flexibility with the BendPak RJ45W, a 4,500-lbs. capacity rolling bridge jack with easy-roll wheels. Designed to slide between four-post lift runways, the RJ45W helps raise wheels off the lift for tire, brake, suspension, and light undercar service.
Wheel Service Gets Easier on HD-9 Four-Post Lifts
The BendPak RJ45W Rolling Bridge Jack adds 4,500 lbs. of frame-engaging lifting capability to compatible four-post lift setups, making it a strong match for HD-9 owners who want more than drive-on vehicle storage and maintenance. Used with a four-post lift, the RJ45W helps raise the vehicle by the frame so the wheels hang free for brake service, tire swaps, suspension work, inspections, and detailing access. This is the bridge jack for users who love the stability and convenience of a four-post lift but still need wheel-service access. A pair of RJ45W rolling bridge jacks can transform an HD-9 style lift from a drive-on platform into a more complete service solution for compact cars, sports cars, garage projects, and daily shop work.
The Standard 4,500-lb. Choice with Practical Clearance
The RJ45W uses a 4.5-inch minimum drive-over height and a 57-inch maximum arm reach, giving it the standard profile and reach for many HD-9 lift applications. For customers who do not need the lower 4.25-inch profile or wider 61-inch reach of the RJ45LP, the RJ45W provides a straightforward 4,500-lb. bridge jack setup with proven four-post lift compatibility. That makes it a smart choice for garages and shops that want dependable wheel-service capability without stepping into a larger-capacity bridge jack than the lift or vehicle requires. It delivers the access most HD-9 users are after: wheels off the runways, frame supported, and service space opened up.
Easy-Roll Positioning with Vehicle-Friendly Contact Pads
The RJ45W comes standard with Easy-Roll wheels designed to fit the runway channels on compatible four-post lifts rated at 7,000 lbs. capacity or greater. The hardened stainless-steel, zinc-plated rollers are built for durability and smooth movement, helping users position the jack quickly beneath the vehicle lift points. Rubber contact pads help protect vehicle surfaces during frame engagement, while stackable adapters increase reach when working with higher-clearance vehicles. BendPak recommends optional frame cradle pads for many trucks and SUVs, giving users another way to match the jack to the vehicle sitting above it.
Independent Air-Hydraulic Power and Three Service Heights
The RJ45W includes a high-pressure hydraulic power unit attached to the jack, with an air requirement of 125 psi and 10 to 20 CFM. A foot pedal mounted directly to the unit gives the operator simple control during lifting, keeping bridge jack operation separate from the four-post lift power system. Three lock positions let users fine-tune service height for the work at hand. Whether the job calls for quick tire removal, brake access, or extra undercarriage clearance, the RJ45W gives HD-9 owners a practical way to get more service capability out of the lift they already use every day.
Key Features
4,500-lb. Bridge Jack Capacity
The RJ45W delivers frame-engaging lifting capability for compatible four-post lift setups, especially HD-9 style garage and shop installations.
Standard RJ45W Profile
A 4.5-inch minimum drive-over height and 57-inch maximum arm reach make this the standard 4,500-lb. option in the RJ45 bridge jack family.
Runway-Channel Rollers
Easy-Roll wheels fit compatible lift runway channels for smoother positioning before the vehicle is raised by the frame.
Non-Marring Lift Pads
Rubber contact pads help engage manufacturer-recommended lift points while reducing the risk of marring vehicle surfaces.
Adapter Reach Included
Stackable adapters help bridge the gap on higher-clearance vehicles, giving users more flexibility across mixed garage projects.
Foot-Pedal Control
A dedicated pneumatic-hydraulic power unit and foot pedal keep bridge jack lifting simple, controlled, and independent from the lift system.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 4500 lb |
| HEIGHT | |
| Pad Only | 4.5 - 15.5 in |
| Pad + 2.75 Inch Adapter | 7.25 - 18.25 in |
| Pad + 5.5 Inch Adapter | 10 - 21 in |
| REACH | |
| Support Base Width | 35.5 - 46.5 in |
| Arm Reach | 42 - 57 in |
| PERFORMANCE | |
| Lifting Time | 55 seconds |
| Pump | Air/Hydraulic |
| Air Pressure | 125 PSI |
| Max Operating Hydraulic Pressure | 2,490 PSI |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 24 x 42 x 12 in |
| Shipping Weight | 378 lb |
| Shipping Method | LTL |
| Offload Requirement | Liftgate |
