BendPak RBJ25000 4-Post Rolling Bridge Jack – 25,000-lb. Capacity
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Maximum wheel-service capability starts with the BendPak RBJ25000, a 25,000-lbs. capacity rolling bridge jack built for the HDS40 four-post truck lift. Designed for heavy-duty commercial fleets and oversized vehicles, the RBJ25000 raises wheels off the runways so technicians can perform tire, brake, suspension, and axle service with more access and control. Not compatible with HDS27 models.
Maximum-Capacity Bridge Jack Power for the Biggest Jobs
The BendPak RBJ25000 Rolling Bridge Jack is the heavyweight option in this bridge jack group, delivering 25,000 lbs. of lifting capacity for extreme truck, bus, and commercial vehicle service. Two RBJ25000 bridge jacks can support a vehicle up to 50,000 lbs. when used correctly, making this model the right choice when wheel-service demands are at their highest. Heavy-duty trucks and buses often require bridge jacks rated for more than half of the vehicle's total weight because axle weight and center of gravity can vary dramatically. The RBJ25000 is built for HDS-40 four-post lift applications where maximum bridge jack capacity, commercial durability, and full wheel-service access are all part of the job.
25,000-lb. Capacity for HDS-40 Lift Applications
The RBJ25000 is over-engineered for extremely heavy vehicles and offset centers of gravity, giving shops the capacity needed for serious commercial service. Generally speaking, if a vehicle can be safely lifted with an HDS-40 four-post lift, the RBJ25000 is the matching rolling bridge jack for wheel-service work. This model is for operations that service the big stuff: heavy-duty trucks, buses, and specialty vehicles where smaller bridge jacks simply are not appropriate. It provides the capacity headroom needed to raise wheels clear while the four-post lift supports the vehicle platform.
Steel Pads and Commercial Contact Strength
BendPak equips the RBJ25000 with steel contact pads built to stand up to heavy-duty service environments. The four steel pads support both axle and vehicle lifting-point contact, giving operators the contact durability expected from a bridge jack made for 25,000-lb. lifting work. The jack is designed to position beneath heavy vehicles before lifting, with contact pads that support demanding commercial applications. For shops handling large vehicles day after day, durable pad construction is not a small detail. It is the part of the job where capacity, contact, and confidence meet.
Dedicated Pneumatic-Hydraulic Power with Three Lock Positions
A powerful pneumatic-hydraulic power unit gives the RBJ25000 its dedicated lifting source. When using two bridge jacks, separate air lines can be connected together with BendPak's optional air-line kit, helping keep the heavy-duty setup cleaner and easier to manage. The foot-pedal-controlled system raises the jack with simple operator input, while three lock positions provide service-height flexibility. The RBJ25000 is built to raise 25,000 lbs. quickly and support premium safety standards at every lock position during demanding wheel, tire, brake, and undercarriage service.
Key Features
25,000-lb. Capacity
The RBJ25000 is BendPak's maximum-capacity bridge jack option in this set, built for extreme heavy-duty wheel service.
HDS-40 Service Match
Designed for HDS-40 four-post lift applications, this jack is built for the vehicles that demand the highest bridge jack capacity.
50,000-lb. Pair Capability
Two RBJ25000 bridge jacks can handle a vehicle up to 50,000 lbs. when properly selected and used within rated limits.
Built for Offset Loads
Heavy trucks and buses can carry uneven axle loads, making extra bridge jack capacity critical for real-world service.
Steel Contact Pads
Four heavy-duty steel pads provide durable axle and lift-point contact for commercial vehicles and specialty equipment.
Dedicated Air-Hydraulic Power
A pneumatic-hydraulic power unit and foot pedal give the operator direct control over heavy-duty bridge jack lifting.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 25000 lb |
| HEIGHT | |
| Pad Only | 9 - 19 in |
| Pad + 2.75 Inch Adapter | 9.75 - 19.75 in |
| Pad + 5.5 Inch Adapter | 10.5 - 20.5 in |
| REACH | |
| Support Base Width | 45 - 45 in |
| Arm Reach | 48.5 - 63.75 in |
| PERFORMANCE | |
| Lifting Time | 55 seconds |
| Pump | Air/Hydraulic |
| Air Pressure | 125 PSI |
| Max Operating Hydraulic Pressure | 7,200 PSI |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 29 x 47 x 17 in |
| Shipping Weight | 786 lb |
| Shipping Method | LTL |
| Offload Requirement | Liftgate |
