APEX AL9LC Two Post Car Lift - 9,000-Lb Capacity - Floorplate
Professional Two-Post Lifting for Low-Ceiling Spaces
The APEX AL9LC is designed to deliver professional two-post lifting performance in garages and shops where overhead clearance is limited. Its floorplate design eliminates the restrictive top crossbar found on many two-post lifts, keeping the workspace open while maintaining full lifting capability.
With a 9,000-lb lifting capacity, the AL9LC is built to handle everything from low-slung sports cars to full-size pickups.
Flexible Arm Geometry for Faster, Easier Vehicle Positioning
Dual symmetric and asymmetric arm configurations allow technicians to position the arms exactly where they are needed. Triple-telescoping front arms and dual-stage extended rear arms provide exceptional reach.
Built for Safety and Stability
Automatic safety locks engage every three inches throughout the lifting range, and automatic arm restraints secure the lift arms in place when the vehicle is raised.
Low-Maintenance Chain-Over Lifting System
The AL9LC uses a proven chain-over lifting design with an industrial-grade, high-strength leaf chain manufactured to ANSI standards.
Designed as a Long-Term Investment
Backed by BendPak's industry-leading 36-month warranty and nationwide support network, the APEX AL9LC is built to be a dependable, long-term investment in shop efficiency, safety, and productivity.
Specifications
| Lifting Capacity | 9,000 lbs. (4,082 kg) |
| Max. Capacity / Front Axle | 4,500 lbs. (2,045 kg) |
| Max. Capacity / Rear Axle | 4,500 lbs. (2,045 kg) |
| A - Height Overall | 109.5" (2,781 mm) |
| B - Width Overall (at Baseplate) | 137.25" (3,486 mm) |
| C - Width Outside of Columns | 127.5" (3,238 mm) |
| D - Floor To Driveover Height | 1.25" (30 mm) |
| E - Width Inside Columns | 113.5" (2,880 mm) |
| F - Front Arm Reach (Min.) | 22.5" (571 mm) |
| F - Front Arm Reach (Max.) | 43.25" (1,099 mm) |
| G - Rear Arm Reach (Min.) | 33.5" (845 mm) |
| G - Rear Arm Reach (Max.) | 53.25" (1,353 mm) |
| H - Min. Pad Height | 3.9" (100 mm) |
| I - Rise | 70" (1,778 mm) |
| J - Max. Lift Height (Pad + 63mm Adapt.) | 76.5" - 78.5" (1,943 - 1,994 mm) |
| K - Drive-Thru Clearance | 103" (2,618 mm) |
| Screw Pad Adjustment | 2" (51 mm) |
| Motor | 220 VAC / 60Hz / 1 Ph |
| Time of Full Rise | 65 seconds |
| Max. Load Per Arm | 2,250 lbs. (1,023 kg) |
