BendPak HDS-14LSXE Extended 4-Post Alignment Lift - 14,000-lb. Capacity
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Longer vehicles get the runway length they need with the BendPak HDS14LSXE, a 14,000-lbs. capacity extended alignment lift built for long-wheelbase cars, trucks, SUVs, and limousines. Compared to the standard HDS14LSX, this extended model adds 30 inches of overall length and runway length while integrating front turn plates and rear slip plates for professional wheel alignment service.
Extended Alignment Lift Space for Longer, Heavier Vehicles
The BendPak HDS-14LSXE Extended Alignment Lift is built for shops that never know what is rolling in next. With 14,000-lb. lifting capacity and an extended-length alignment platform, this four-post lift is designed to handle everything from sedans and pickups to longer residential vehicles, municipal vehicles, and specialty work that needs extra runway room. For shops that regularly service long-wheelbase vehicles, the HDS-14LSXE gives technicians the added length, alignment hardware, and runway stability needed to work confidently. It combines BendPak's heavy-duty four-post construction with integrated alignment equipment so big jobs feel planned, not improvised.
Extended Runways with Built-In Alignment Hardware
Front turn plates and rear multi-caster slip plates are integrated into the HDS-14LSXE alignment system to support precise, free-floating alignment work. The front turn plates use aluminum-alloy construction and position within recessed turn plate pockets, giving technicians flexibility for different vehicle setups while maintaining a clean runway layout. The longer runway design gives extended vehicles the support they need, while longer approach ramps help reduce the loading angle for low ground-clearance vehicles. Runways adjust for different tread widths and include a rail kit for optional accessories, giving this extended alignment lift more utility than a standard drive-on platform.
Heavy-Duty Cable System and Protected Lift Structure
The HDS-14LSXE uses oversized cable sheaves and heavy-duty 1/2-inch aircraft-quality lifting cables to support demanding alignment work. Rugged roller axles and large sheave geometry help reduce cable stress, while internal routing helps protect critical lift components from damage and shop exposure. A single hydraulic cylinder mounted underneath the runway powers the lift, and internal Anti-Sway slider blocks in each column help support stable platform movement. Fully enclosed lifting cables, safety locks, sheaves, and related systems help keep the lift cleaner, safer, and better prepared for daily commercial use.
Auto-Leveling Safety, Push-Button Release, and Bridge Jack Capability
The HDS-14LSXE includes an automatic leveling system and multiple auto-leveling locking positions to help maintain proper runway height during alignment service. Multi-position safety locks in each column engage as the lift rises, and push-button pneumatic safety release makes lowering fast and consistent. Optional bridge jacks expand the lift into full wheel-service territory, allowing shops to add brake, tire, suspension, and wheel work to alignment operations. For facilities that need to support longer vehicles without giving up alignment accuracy, the HDS-14LSXE is built to bring reach, capacity, and control together.
Key Features
Extended Alignment Platform
Longer runways help support long-wheelbase vehicles, municipal vehicles, pickups, and larger service applications.
14,000-lb. Capacity
Commercial lifting strength gives shops the confidence to handle heavier vehicles and demanding alignment work.
Built-In Slip Plates
Rear multi-caster slip plates support free-floating wheel movement during alignment adjustment.
Deluxe Turn Plates
Aluminum-alloy turn plates fit into recessed pockets for flexible vehicle positioning and alignment setup.
Protected Lift Systems
Internal routing and enclosed components help protect cables, sheaves, safety locks, and airlines from daily shop abuse.
Wheel-Service Ready
Optional bridge jacks help expand the lift beyond alignment into wheel, brake, and suspension service.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 14000 lb |
| RISE | |
| A Min Runway Height | 7.5 in |
| B Max Rise | 70.75 in |
| C Max Lifting Height | 77.5 in |
| OUTSIDE DIMENSIONS | |
| D Width | 130 in |
| E Outside Length | 243 in |
| F Length | 272 in |
| G Height | 92 in |
| INSIDE DIMENSIONS | |
| H Inside Columns | 120 in |
| I Drive-Thru Clearance | 98 in |
| RUNWAYS | |
| J Runway Width | 20 in |
| K Runway Length | 227.5 in |
| ALIGNMENT | |
| M Min 4-Wheel Alignment | 89 in |
| N Max 4-Wheel Alignment | 156 in |
| O Max 2-Wheel Alignment | 212 in |
| MINIMUM WHEELBASE | |
| Rated Wheelbase Capacity | 165 in |
| 75% Capacity | 140 in |
| 50% Capacity | 115 in |
| 25% Capacity | 95 in |
| LOCKING | |
| Locking Positions | 15 |
| Locking Spacing | 4 in |
| POWER UNIT AND VOLTAGE | |
| Voltage | 208-230V / 60 Hz / 1-Phase |
| Sound Level | 45 dB |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 25 x 239 x 33 in |
| Shipping Weight | 3368 lb |
| Shipping Method | Flatbed |
| Offload Requirement | Forklift |
