BendPak HDS-14LSX Four-Post Alignment Lift - 14,000-lb. Capacity
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Professional alignment work gets more capability from the BendPak HDS14LSX, a 14,000-lbs. capacity alignment lift that works as both a four-post car lift and an alignment system. Integrated front turn plates and rear slip plates are built into the runways, giving technicians a stable platform for wheel alignment service on cars, trucks, SUVs, and light-duty commercial vehicles.
14,000-lb. Alignment Power for Shops That Stay Busy
The BendPak HDS-14LSX Alignment Lift is built for professional shops that need heavy lifting capacity, alignment precision, and daily durability in one serious four-post platform. With 14,000-lb. lifting capacity, extended runways, built-in front turn plates, and integrated rear slip plates, this alignment lift is made to handle demanding vehicles and high-volume service environments. This is the alignment lift for shops that service larger vehicles, low ground-clearance vehicles, light trucks, SUVs, and mixed customer fleets. The free-floating alignment system lets the wheels respond cleanly to adjustment, helping technicians work faster and with less resistance during suspension and alignment service.
Integrated Turn Plates and Rear Slip Plates for Free-Floating Alignment
The HDS-14LSX includes heavy-duty front turn plates and integrated rear slip plates integrated with the runways, giving technicians the hardware needed for accurate four-wheel alignment work. Multi-caster slip plates in the rear help maintain free wheel movement, while recessed front turn plate pockets allow the galvanized turn plates to be positioned for individual vehicle setups. Multi-position turn plate pockets help the lift adapt to different wheelbases and service needs, while the runways adjust for different tread widths. Longer approach ramps make it easier to load low ground-clearance vehicles, helping protect customer cars and improve workflow in busy alignment bays.
Aircraft-Quality Cables, Oversized Sheaves, and Anti-Sway Support
The HDS-14LSX is built around heavy-duty 1/2-inch aircraft-quality stainless-steel lifting cables routed internally through all four columns. These cables are designed for continuous use and resistance to rubbing, weather, chemicals, hydraulic oil, and other common sources of wear in active service environments. Oversized 10.5-inch cable sheaves, rugged 1-3/8-inch roller axles, and internal Anti-Sway slider blocks help support smooth lifting, reduced wear, and stable platform movement. The single hydraulic cylinder is mounted underneath the runway, while cables, sheaves, airlines, safety locks, and critical systems are integrated within the lift structure for cleaner operation and better protection.
Automatic Leveling, Safety Locks, and Accessory-Ready Runways
The HDS-14LSX features an automatic leveling system, multiple auto-leveling locking positions, and multi-position safety locks in each column. Spring-loaded safety locks engage as the lift rises, and a push-button pneumatic lock release makes lowering operations fast and efficient. A secondary slack-cable lock system adds backup protection if dangerous cable slack is ever detected. Runways include a rail kit for optional accessories, including 7,000-lb. capacity bridge jacks for wheel, brake, and suspension service. With an electric-hydraulic power system, easy operator access, durable matte-finish runways, and BendPak's alignment-specific design, the HDS-14LSX is built to be the backbone of a serious alignment bay.
Key Features
14,000-lb. Alignment Power
Heavy-duty lifting capacity makes the HDS-14LSX a strong fit for larger vehicles, SUVs, trucks, and high-volume alignment work.
Free-Floating Runways
Front turn plates and rear slip plates help wheels respond smoothly during alignment adjustments with less resistance.
Multi-Position Turn Plates
Recessed turn plate pockets allow more flexible front plate placement for different vehicle setups.
Automatic Leveling
Auto-leveling locks help keep the runways positioned properly during lifting and alignment service.
Anti-Sway Column Support
Internal Anti-Sway slider blocks help support stable platform movement inside each column.
Bridge Jack Ready
Accessory-ready runways support optional 7,000-lb. bridge jacks for wheel, brake, and suspension service.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 14000 lb |
| RISE | |
| A Min Runway Height | 7.5 in |
| B Max Rise | 70.75 in |
| C Max Lifting Height | 77.5 in |
| OUTSIDE DIMENSIONS | |
| D Width | 130 in |
| E Outside Length | 213 in |
| F Length | 242 in |
| G Height | 92 in |
| INSIDE DIMENSIONS | |
| H Inside Columns | 120 in |
| I Drive-Thru Clearance | 98 in |
| RUNWAYS | |
| J Runway Width | 20 in |
| K Runway Length | 197.5 in |
| ALIGNMENT | |
| M Min 4-Wheel Alignment | 89 in |
| N Max 4-Wheel Alignment | 156 in |
| O Max 2-Wheel Alignment | 182 in |
| MINIMUM WHEELBASE | |
| Rated Wheelbase Capacity | 140 in |
| 75% Capacity | 120 in |
| 50% Capacity | 100 in |
| 25% Capacity | 80 in |
| LOCKING | |
| Locking Positions | 15 |
| Locking Spacing | 4 in |
| POWER UNIT AND VOLTAGE | |
| Voltage | 208-230V / 60 Hz / 1-Phase |
| Sound Level | 45 dB |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 25 x 209 x 33 in |
| Shipping Weight | 3216 lb |
| Shipping Method | Flatbed |
| Offload Requirement | Forklift |
