BendPak 10APX-181 Two Post Car Lift - 10,000-Lb Capacity - 181" Extended Height
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Extra overhead clearance is the point of the BendPak 10APX-181, a 10,000-lbs. capacity high-rise two-post car lift with a 181-in. extended height. Its adaptable clearfloor design, adjustable-width layout, and symmetric/asymmetric lifting capability give technicians more room and more flexibility for cars, trucks, SUVs, vans, and electric vehicles.
Tall-Vehicle Clearance with High-Rise BendPak Power
The BendPak 10APX-181 Two-Post Car Lift is the tallest version in this 10AP high-rise group, pairing 10,000 lbs. of lifting capacity with a 79.5-inch lifting height and a 181-inch overhead beam. It is built for shops that need the extra overhead clearance to service taller vehicles, including high-roof cargo vans, while still benefiting from the AP Series arm design, safety systems, and adaptable clearfloor layout. For technicians who spend long days under raised vehicles, the 10APX-181 creates a more comfortable service environment without giving up the flexibility of a two-post lift. It keeps the low-profile arm access, Bi-Metric™ positioning, triple-telescoping reach, and reinforced safety engineering that make the 10AP Series a strong fit for modern repair operations.
Extended Overhead Clearance with AP Series Safety Engineering
The 181-inch overhead beam is the key reason to choose the 10APX-181 over the standard 10APX. Shops that regularly work around taller body styles, high-roof vans, and larger vehicles gain more overhead space while still using a 10,000-lb. two-post platform designed for efficiency, operator safety, and heavy service demands. The lift is engineered with modern vehicle service in mind, including EVs and heavier vehicles that introduce more stress on lift components. High tensile-strength steels, wide column spacing, and safety-critical design enhancements help technicians handle changing vehicle weights and lift-point layouts with more confidence.
Automatic Arm Restraints and Low-Pro™ Lifting Access
BendPak’s Automatic Swing Arm Restraint System secures the lift arms with a forged-steel design that provides full 360-degree load-holding grip and more than 2,000 lbs. of side-force resistance. This helps reduce the chance of unplanned arm movement when vehicle balance changes during service, component removal, or installation. Patented triple-telescoping nested swing arms offer more positioning range by retracting shorter and extending farther than traditional two-post lift arms. Low-Pro™ arm channels and dropped-end pad receivers help access low chassis-height vehicles, while Bi-Metric™ arms allow symmetric or asymmetric loading depending on the vehicle and job.
Tall-Lift Durability for Professional Repair Bays
The 10APX-181 is built with dual hydraulic direct-drive cylinders, an electric hydraulic HVLP power system, self-lubricating Dura-Glide UHMW polyethylene bearings, high-strength galvanized equalizing cables, and safety locks in each column spaced every 3 inches. A single-point safety release helps simplify descent, while the padded overhead shutoff bar adds another layer of protection during lifting. Double-telescoping screw pads help operators level and secure vehicles at the proper lift points, and optional stackable adapters can increase vertical pad placement when needed. With a durable powder coat finish and ALI certification, the 10APX-181 is built for shops that want maximum overhead clearance in the 10AP high-rise family.
Key Features
181-Inch Overhead Beam
The extended overhead beam gives shops more clearance for taller vehicles and high-roof cargo vans.
79.5-Inch Lifting Height
High-rise lifting height helps technicians work more comfortably beneath raised vehicles.
High-Roof Vehicle Support
Designed for shops that need additional overhead room while servicing vans, taller SUVs, and larger vehicle platforms.
ASARS Arm Restraints
Automatic arm restraints deliver 360-degree holding grip and more than 2,000 lbs. of side-force resistance.
Bi-Metric™ Loading
Arm design supports symmetric and asymmetric vehicle loading without swapping arms.
ALI Certified Design
Built and certified for professional shop environments where safety, durability, and repeatable performance matter.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 10000 lb |
| Max Capacity Per Arm | 2500 lb |
| RISE | |
| A Rise | 75.5 in |
| B Rise + Pad | 79.5 in |
| D Min Lifting Height with Pad | 4 in |
| Lifting Time | 45 seconds |
| OUTSIDE DIMENSIONS | |
| E Height | 181 in |
| F Width | 135 - 145 in |
| G Outside Columns | 127.5 - 137.5 in |
| INSIDE DIMENSIONS | |
| H Inside Columns | 108.5 - 118.5 in |
| I Drive-Thru Clearance | 92 - 102 in |
| J Floor to Overhead Switch | 175.75 in |
| ARMS AND PADS | |
| K Front Arm Reach Min | 24.5 in |
| K Front Arm Reach Max | 50 in |
| L Rear Arm Reach Min | 32 in |
| L Rear Arm Reach Max | 59.25 in |
| Screw Pad Adjustment | 2 in |
| POWER UNIT AND VOLTAGE | |
| Horsepower | 5 HP |
| Voltage | 208-230V / 60 Hz / 1-Phase |
| Sound Level | < 70 dB |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 24 x 163 x 30 in |
| Shipping Weight | 1946 lb |
| Shipping Method | Flatbed |
| Offload Requirement | Forklift |
