Skip to content
🏠 Family-Owned & Operated | 🇺🇸 American-Run & No Call Centers | About Us ->
🏠 Family-Owned & Operated | 🇺🇸 American-Run & No Call Centers | About Us ->

HALO LIFTS HL10K-PRO 4-POST PRO CAR LIFT - 10,000 LB CAPACITY

by HALO
SKU HL10K-PRO
Save $205.00 Save $205.00
Original price $5,200.00
Original price $5,200.00 - Original price $5,200.00
Original price $5,200.00
Current price $4,995.00
$4,995.00 - $4,995.00
Current price $4,995.00
$5,200.00 $4,995.00
Request a quote
Equipment Delivery Options

At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.

I have the equipment to unload my order

Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.

What to keep in mind when choosing this option:

  • The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
  • Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
  • You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
  • Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
  • There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.

In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.


Pick up at one of our warehouses

Do you have a hitch trailer to transport your lift? If so, then this might be the best option.

What to keep in mind when choosing this option:

  • Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
  • Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.

Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.


Dock Hold from LTL Carrier

Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.

You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.


Ship directly to a local installer

Neither of the above delivery options suits you? Then we have the solution.

We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.

What to keep in mind when choosing this option:

  • You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
  • We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)

Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.

Returns & Refunds

CANCELLATIONS

We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.

RETURNS

Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.

ADDITIONAL WARRANTY INFO

For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.

The Halo Lifts HL10K-PRO is the top of Halo's 4 post line for safety and reliability. It combines the wrap-around cross-beam design, a triple safety system and boxed steel posts for a true 10,000 lb capacity lift, built for professional garages and car enthusiasts alike.

⚠ Safety & Delivery Requirements

Never exceed the rated 10,000 lb capacity, and always lower the lift onto its safety locks before working underneath. Follow the Halo installation manual. This lift ships by freight and weighs 2,250 lbs, so a forklift, high-capacity hoist or tractor is mandatory to unload it from the truck.

Key Features

  • Triple Safety System — 3/4" thick safety locks engage simultaneously as the lift passes each lock notch, spaced 4 inches apart. Secondary cable tension locks on each corner add a second layer of security, creating a robust three-part safety system.
  • Wrap-Around Cross-Beam Design — Eliminates the chance of locks skipping or becoming disengaged, for maximum safety.
  • Structural Steel Posts — Combined with laser-cut lock notches, these posts provide unmatched rigidity and strength, a superior alternative to standard lifts.
  • Cable Keeps — Each cable under the runways is held in place with cable keeps, so it can't become dislodged or skip its pulley.
  • Single Manual Handle Release — One manual handle releases all four locks at once, with no compressor needed.
  • Adjustable Motor Mounting Angles — Mount the motor in any of three positions on the post to push the lift flush against the side of your garage.
  • Lightweight Drive-Up Ramps — Made of aluminum (updated 4/10), these lightweight ramps are easy to maneuver.
  • Post-Mounted Casters — Easier to use than standard crossbeam-mounted casters.

Dimensions & Clearance

  • Drive-Through Clearance — 99" of room for wide vehicles to pass through.
  • Runway Length — 172.36".
  • Drive-Under Clearance — 72" to work beneath vehicles or store a second vehicle underneath.
  • 23" wide runways to accommodate all tire sizes.

What's New in the 10,000 lb PRO

Halo didn't just raise the weight rating. Every critical component was reinforced for a true 10,000 lb capacity, with thicker steel, larger structural elements and better stability throughout.

Stronger Lifting System

  • Thicker cables — upgraded from 3/8" to 1/2" for more tensile strength and durability
  • Larger hydraulic cylinder — 2 3/4" to 3 1/8" for more lifting power and smoother operation
  • Bigger cylinder axle — 1" to 1 3/16" for better load handling

Heavier-Duty Structural Components

  • Thicker base plates — 9/16" to 5/8" for a more solid foundation
  • Larger columns — 4 3/4" x 4 3/4" to 5" x 5" for more rigidity
  • Thicker cross components — lock system (primary and secondary locks) 5/8" to 3/4", runway end plates 5/16" to 3/8", caster frame 1/4" to 5/16"

Reinforced Runway & Crossbeam Design

  • Boxed steel reinforcement added underneath the runways
  • Welded crossbeam reinforcement plate for added structural integrity
  • Better stability under load, especially with heavier vehicles

Improved Adjustability & Setup

  • Dual-end cable adjustment (instead of top-only) for easier leveling and long-term maintenance
  • Larger, longer wrap-around collars for more support and safety engagement

Upgraded Contact & Drive Components

  • Larger base plates — 11" x 11" to 12" x 12" for better load distribution
  • Aluminum approach ramps replace steel for lighter weight and corrosion resistance

Warranty upgraded from 5 years to 10 years, no hassle.

Built for Professionals and Enthusiasts Alike

Professional garages can work with confidence, knowing the lift's safety features protect both the vehicle and the technician. Its structural integrity and ease of operation make it a valuable asset for any busy shop. Car enthusiasts get adjustable features and a user-friendly design that fits most home garages while delivering professional-grade performance.

Included Accessories

Every Halo Lifts Pro Series lift comes with:

  • 1 Rolling Jack Tray
  • 3 Drip Trays
  • 4-Piece Caster Set
  • 34" Steel Lightweight Approach Ramps — orders after 4/10/26 come with 36" aluminum ramps
  • 4 Tire Stops — 4 removable (updated 4/14)

Product Walkthrough

Comparison Video Of Our Pro Lifts vs Halo Series

Halo Pro Lift With Cars Walkthrough

Halo Pro Lift Installation Video

Measurements Diagram

Halo four-post lift top-view diagram with letter-labeled dimensions A through K

Top view

Halo four-post lift side-view diagram with letter-labeled dimensions D, E and F

Side view

Specifications

Model HL10K-PRO
Lifting Capacity 10,000 lbs
Dimensions
(A) Overall Width 115.75"
(B) Overall Length 183.75"
(D) Height of Post 93"
(E) Runway Thickness 4"
(F) Underneath Clearance on Top Lock 72"
(G) Drive-Through Clearance on Bottom 99"
Drive-Through Clearance on Top 85.88"
(H) Width of Runways 23"
(I) Width Between Runways 38"
(J) Outside Edge of Runways 84"
(K) Length of Runways 172.36"
Locks, Power & Shipping
Locking Positions 13
Lock Spacing 4"
Motor 110V / 1.5 HP / 30 AMP, ETL motor
Shipping Weight 2,250 lbs
Shipping Dimensions 177 x 26 x 30

Warranty

Halo's upgraded 10-year, no hassle warranty (up from 5 years).

HALO Locations. Locations subject to change and not all products are at all locations, please contact us for the most updated information.

Freight Shipping

To the continental USA

Need help?

Contact us for support today

Financing

Multiple great options available

40+ Locations

Nationwide