BendPak PL-6KT - 6,000-lb. Capacity / Triple / Independent Platforms
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Store three vehicles across one horizontal parking lift system with the PL-6KT triple parking lift. Built with 18,000-lbs. total capacity and independent platforms, this special-order parking lift helps collectors, storage facilities and high-density garages increase vehicle capacity without relying on stacked vertical-only layouts. It is a smart solution when floor space is limited and organized access matters.
Six Vehicles, One Massive Parking Lift
The BendPak PL-6KT triple platform parking lift is built for serious vehicle storage when three stalls need to become six without turning the facility into a puzzle box. With three independent platforms, a streamlined four-column structure, and 6,000 lbs. of capacity per deck, this 18,000-lb. total-capacity parking lift gives commercial garages, municipal lots, custom shops, and large residential garages a smarter way to multiply parking density. Instead of buying multiple individual parking lifts and hoping the layout works, the PL-6KT creates a purpose-built triple-wide storage system in one organized footprint. It keeps vehicles easier to access, protects the lower row with full-width platforms, and gives high-volume storage environments the kind of capacity that actually changes the math.
Three Independent Platforms Keep the Whole System Moving
Each of the PL-6KT's three galvanized steel platforms operates independently, so one vehicle can be raised or lowered without disturbing the other two upper-deck vehicles. That independent platform design is the real advantage for owners who need more parking without constantly moving cars around just to access a single vehicle. The layout is ideal for long-term storage, short-term parking, collector vehicles, motorcycles, ATVs, light trucks, and mixed-use parking operations. With independent lift control across all three decks, the PL-6KT helps keep the storage process organized, efficient, and a lot less annoying than playing automotive musical chairs.
Full-Width Galvanized Platforms Built for Real Storage Duty
The PL-6KT uses full-width galvanized steel platforms designed to cover the length and width of each parking deck. These rugged platforms help shield vehicles stored below while resisting oil, weather, abuse, and the daily realities of vehicle storage environments. Built-in wheel stops, front and rear wheel chocks, wide base plates, and a durable powder-coat superstructure help support stable, long-term use. From custom shops to parking facilities, this triple platform lift is engineered to feel like permanent infrastructure, not a temporary storage workaround.
Heavy-Duty Lifting Hardware with Safety Built Into Every Column
BendPak routes the PL-6KT's hydraulic cylinders and lifting cables internally through the lift structure to keep the system cleaner, safer, and more organized. Dual hydraulic cylinders, heavy-duty steel lifting cable, oversized sheave diameters, rugged roller axles, and a reliable electric-hydraulic power system work together to deliver fast, controlled lifting across the massive platform structure. Multi-position safety locks in each column, push-button pneumatic safety release, independent backup slack-cable safety latches, and customizable power-unit placement help make the PL-6KT a professional parking lift solution for facilities that need dependable capacity without sacrificing control or confidence.
Key Features
Triple-Wide Parking Power
Designed to turn three parking spaces into six, the PL-6KT gives high-capacity storage operations a smarter way to use available floor space.
18,000-lb. Total Capacity
Each independent platform supports up to 6,000 lbs., giving the lift a combined 18,000-lb. total loading capacity.
Independent Platform Control
All three platforms move independently, helping reduce vehicle shuffling when only one raised vehicle needs to be accessed.
Galvanized Full-Width Decks
Full-width galvanized platforms help protect lower vehicles while resisting oil, weather, and daily storage wear.
Internal Cable Routing
Hydraulic lines and lifting cables are routed internally through the structure for cleaner operation and controlled platform movement.
Pneumatic Safety Release
Push-button pneumatic safety release and multi-position locks help keep operation controlled across all three parking platforms.
Specifications (Imperial)
| STYLE | |
| Style | Multi-Platform Parking Lift |
| Number of Platforms | 3 |
| CAPACITY | |
| Load Capacity per Platform | 6000 lb |
| RISE AND LOCKING | |
| Max Rise | 92 in |
| Max Lifting Height | 103.25 in |
| Locking Positions | 7 |
| Locking Spacing | 10 in |
| Lock Release | Air Powered Release |
| Lifting Time | 60 seconds |
| OVERALL DIMENSIONS | |
| Width | 308.5 in |
| Length | 236.5 in |
| Height | 122.75 in |
| INSIDE CLEARANCE | |
| Drive-Thru Clearance | 91 in |
| Inside Columns | 283.25 in |
| PLATFORM AND RUNWAYS | |
| Platform Width | 82 in |
| Platform Length | 152 in |
| POWER AND CONTROLS | |
| Voltage | 208-240V / 50/60 Hz / 1-Phase |
| Amperage | 22 Amps |
| Sound Level | 52 dB |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 25 x 314 x 52 in |
| Shipping Weight | 8889 lb |
| Shipping Method | Flatbed |
| Offload Requirement | Forklift |
