BendPak HD-9XW - 9,000-lb. Capacity / Four-Post Lift / Standard Width / High Lift
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Store, service and inspect vehicles with added vertical clearance using the HD-9XW standard-width high-lift four-post car lift. Built with 9,000-lbs. capacity, it provides a wider runway layout and extra lift height for garages, collectors and shops that need more space beneath the vehicle. It is a strong solution for parking, maintenance access and high-clearance four-post lift setups.
High-Rise Four-Post Lifting for Trucks, SUVs, and Tall Bays
The BendPak HD-9XW Four-Post Lift is built for users who have the ceiling height and want more room to work, park, and store larger vehicles. With a 9,000-lb. capacity, standard-width platform, and high-rise design, the HD-9XW gives trucks, SUVs, and wider vehicles the space they need without squeezing mirrors, doors, or technicians into a narrow lift bay. With 82 inches of rise at the runways, this high-rise four-post lift creates more clearance below the raised vehicle for storage and service. It is a strong fit for serious DIY garages and professional shops that want BendPak HD-9 capability with extra vertical clearance for high-profile vehicles and more comfortable underbody access.
Standard Width, Extra Height, More Vehicle Freedom
The HD-9XW gives owners more breathing room than narrow-width four-post lifts while preserving the parking, storage, and service flexibility that makes the HD-9 family so popular. The standard-width layout is better suited for wide-body trucks and SUVs, while the high-rise configuration helps accommodate taller lower-level vehicles. This combination makes the HD-9XW especially useful for garages with generous ceiling height and owners who do not want to discover too late that a taller truck will not fit underneath. More height means more flexibility and fewer storage surprises.
Engineered with BendPak's Integrated Four-Post Lift Systems
The HD-9XW uses an electric-hydraulic power system with a single hydraulic cylinder mounted beneath the runway. Fully enclosed cables, safety locks, sheaves, and internal anti-sway slider blocks help keep the system protected and organized. Oversized self-lubricating cable rollers, rugged 1.25-inch roller axles, heavy-duty 3/8-inch aircraft cable, multi-position locks, and adjustable lock ladders support the kind of daily reliability expected from a BendPak four-post lift.
High-Rise Storage and Service with Built-In Safety
The HD-9XW includes push-button pneumatic safety release, independent backup slack-cable safety latches, removable approach ramps, and a customizable power unit location to help fit different garage and shop layouts. Longer approach ramps are available for low-ground clearance vehicles. For users who want to turn a high-ceiling bay into a more capable workspace, optional accessories such as drip trays, solid decks, drive-thru ramps, and RJ-45 rolling bridge jacks can expand the HD-9XW from a storage lift into a more complete service platform.
Key Features
High-Rise HD-9 Platform
The HD-9XW adds extra vertical clearance to the HD-9 family for users with taller bays and bigger storage goals.
82-Inch Runway Rise
With 82 inches of rise at the runways, this four-post lift provides more working room and better lower-level vehicle clearance.
Standard-Width Layout
The standard-width design is more comfortable for wide-body trucks and SUVs than narrow-width four-post lift models.
Internal Safety Systems
Cables, locks, sheaves, and safety components are routed inside the lift structure to help protect critical systems.
Pneumatic Lock Release
Push-button pneumatic safety release helps make lowering more efficient while multi-position locks support secure service heights.
Service-Ready Accessories
Runway rail provisions support optional rolling bridge jacks and other accessories for expanded wheel and underbody service.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 9000 lb |
| RISE | |
| A Min Runway Height | 5 in |
| B Max Rise | 82 in |
| C Max Lifting Height | 87 in |
| OUTSIDE DIMENSIONS | |
| D Width | 110.25 in |
| E Outside Length | 198 in |
| F Overall Length | 224.5 in |
| G Height | 100.25 in |
| INSIDE DIMENSIONS | |
| H Inside Columns | 100.25 in |
| I Drive-Thru Clearance | 86.5 in |
| RUNWAYS | |
| J Runway Width | 19 in |
| K Runway Length | 182.25 in |
| L Width Between Runways | 35 - 41 in |
| M Runway Centerline | 56.75 - 63 in |
| N Outside Edge of Runways | 75.75 - 82 in |
| MINIMUM WHEELBASE | |
| Rated Wheelbase Capacity | 135 in |
| 25% Capacity | 80 in |
| 50% Capacity | 95 in |
| 75% Capacity | 115 in |
| LOCKING | |
| Locking Positions | 17 |
| Locking Spacing | 4 in |
| POWER UNIT AND VOLTAGE | |
| Horsepower | 2 HP |
| Voltage | 208-230V / 60 Hz / 1-Phase |
| Sound Level | 45 dB |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 22 x 192 x 32 in |
| Shipping Weight | 1778 lb |
| Shipping Method | Flatbed |
| Offload Requirement | Forklift |
