BendPak HD-9SWX - 9,000-lb. Capacity / Four-Post Lift / Dual Platform / Super Wide / Extended-Length
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Gain extra rise and super-wide vehicle clearance with the HD-9SWX four-post lift, built with 9,000-lbs. capacity and 82-in. rise for better under-vehicle access. Designed for wider cars, trucks and SUVs, this car lift gives garages, collectors and service bays a practical solution for parking, storage, inspections and maintenance when both platform width and added working height matter.
More Height, More Length, More Room to Park
The BendPak HD-9SWX Four-Post Lift is the extended-length, high-rise double-wide answer for garages and shops that need maximum parking flexibility from a 9,000-lb. four-post lift platform. Built to transform a two-car space into a four-car storage setup, the HD-9SWX adds the extra runway length and lifting height needed for longer wheelbases, taller parking combinations, and more comfortable service access. This super-wide lift gives users four runways, a double-wide configuration, and open-center service potential in one serious garage upgrade. For collectors, families, professional shops, and anyone tired of choosing which vehicles get protected indoors, the HD-9SWX brings quad-vehicle parking with BendPak engineering underneath it.
Extended-Length Runways for Long Vehicles and Easier Loading
The HD-9SWX is built for users who need more than the standard double-wide footprint. Its extended-length runways are especially useful for parking or servicing long-wheelbase vehicles, while the extra rise provides additional clearance underneath for storage and service work. Low-stance vehicles can glide onto the runways with less risk of chassis interference, and the extra-long ramp helps create a friendlier loading path. The result is a double-wide four-post lift that is better suited for larger vehicle mixes and more ambitious garage layouts.
High-Rise Four-Post Engineering with BendPak Hardware
The HD-9SWX uses an electric-hydraulic power system, a single hydraulic cylinder mounted under the runway, and fully enclosed lifting cables, safety locks, and sheaves. Heavy-duty 3/8-inch aircraft cable, oversized self-lubricating cable rollers, rugged 1.25-inch roller axles, and internal anti-sway slider blocks help keep the platform stable during operation. Oversized sheave diameter helps reduce cable fatigue, while multi-position safety locks and adjustable lock ladders give users more control over parking and service height. For a lift this wide and long, those details are not decoration. They are the reason the HD-9SWX feels like BendPak equipment.
Accessory-Ready Storage Lift That Still Works Like a Service Lift
The HD-9SWX is designed for parking, storage, and service. Runways accommodate wide or narrow vehicles, inside runways adjust for different tread widths, and the rail-kit provisions support optional accessories that can expand the lift's role in the garage or shop. Optional drive-thru ramps, drip trays, solid decks, and 4,500-lb. air-hydraulic rolling bridge jacks allow users to build a more complete four-post lift system. When customers need extended-length parking capacity without giving up service flexibility, the HD-9SWX is the model that earns the bigger footprint.
Key Features
Extended Double-Wide Design
The HD-9SWX combines quad-vehicle storage with extended-length runways and high-rise clearance for larger garage and shop layouts.
Long-Wheelbase Friendly
Extra runway length helps accommodate longer vehicles that may feel crowded on standard-length double-wide platforms.
Super-Tall Rise
Additional lifting height creates more clearance underneath for vehicle storage combinations and service access.
Extra-Long Ramp
The longer ramp helps low-stance vehicles load more smoothly onto the runways with less chassis stress.
Adjustable Tread Widths
Inside runways adjust for different tread widths, giving users more flexibility with varied vehicle lineups.
Bridge Jack Ready
Optional 4,500-lb. rolling bridge jacks can add wheel-service capability to the HD-9SWX platform.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 9000 lb |
| RISE | |
| A Min Runway Height | 7 in |
| B Max Rise | 82 in |
| C Max Lifting Height | 89 in |
| OUTSIDE DIMENSIONS | |
| D Width | 202 in |
| E Outside Length | 198 in |
| F Overall Length | 242.5 in |
| G Height | 102 in |
| INSIDE DIMENSIONS | |
| H Inside Columns | 192 in |
| I Drive-Thru Clearance | 81 in |
| RUNWAYS | |
| J Runway Width | 19 in |
| K Runway Length | 188 in |
| L Width Between Runways | 34.25 - 41 in |
| M Runway Centerline | 56.25 - 62.75 in |
| N Outside Edge of Runways | 75.25 - 81.75 in |
| MINIMUM WHEELBASE | |
| Rated Wheelbase Capacity | 135 in |
| 25% Capacity | 80 in |
| 50% Capacity | 95 in |
| 75% Capacity | 115 in |
| LOCKING | |
| Locking Positions | 17 |
| Locking Spacing | 4 in |
| POWER UNIT AND VOLTAGE | |
| Horsepower | 2 HP |
| Voltage | 208-230V / 60 Hz / 1-Phase |
| Sound Level | 45 dB |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 23 x 205 x 51 in |
| Shipping Weight | 3038 lb |
| Shipping Method | Flatbed |
| Offload Requirement | Forklift |
