BendPak HD-9SW - 9,000-lb. Capacity / Four-Post Lift / Dual Platform / Super Wide
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
The BendPak HD-9SW Four-Post Lift is built for one of the biggest garage problems there is: not enough protected parking. With its super-wide dual-platform layout, this 9,000-lb. four-post lift lets users park up to four vehicles in the space that would normally hold two.
Four-Car Parking Without the Garage Tetris
The BendPak HD-9SW Four-Post Lift is built for one of the biggest garage problems there is: not enough protected parking. With its super-wide dual-platform layout, this 9,000-lb. four-post lift lets users park up to four vehicles in the space that would normally hold two, making it a serious upgrade for collectors, homeowners, and shops that need more indoor storage without adding more building. This is not just a parking-only stacker. The HD-9SW uses open-center runways, adjustable inside runway positioning, and accessory-ready rails so it can support vehicle storage, maintenance, and service work. For garages where daily drivers, weekend cars, trucks, and projects are all fighting for space, the HD-9SW turns a crowded floor plan into a much smarter four-post lift setup.
Super-Wide Dual Platform Design for Parking and Service
The HD-9SW is designed around a double-wide four-post lift configuration with four runways and 192-inch post-to-post clearance. That extra width gives users room to park two vehicles across the top platform while still preserving useful space below for additional vehicles or shop workflow. Shorter runways make the HD-9SW a strong fit for smaller spaces compared with extended-length double-wide models, while the inside runways adjust for different tread widths. This gives users more flexibility when loading different cars, trucks, and SUVs onto the lift.
Cable, Sheave, and Hydraulic Systems Built for BendPak Durability
BendPak equips the HD-9SW with an electric-hydraulic power system, a single hydraulic cylinder mounted underneath the runway, and fully enclosed lifting cables, safety locks, and sheaves. Dual-hub cable sheaves help reduce friction on the cables, while oversized sheave diameter helps reduce cable fatigue during repeated lifting cycles. Heavy-duty 3/8-inch aircraft cable, oversized self-lubricating cable rollers, rugged 1.25-inch roller axles, and internal anti-sway slider blocks all support smooth, steady platform movement. The result is a double-wide four-post lift that feels purpose-built for regular parking, storage, and service use.
Safety Locks, Accessories, and Real Garage Flexibility
The HD-9SW includes multi-position safety locks in each column, adjustable lock ladders, push-button pneumatic safety release, and independent backup slack-cable safety latches. Removable approach ramps add drive-under clearance, and the durable matte runway finish supports daily use in serious garages and shop environments. Optional drive-thru ramps, drip trays, solid decks, and 4,500-lb. air-hydraulic rolling bridge jacks help users configure the lift around the way they actually work. The HD-9SW is built to park more, store smarter, and keep service capability within reach.
Key Features
Double-Wide Parking
The HD-9SW is designed to park up to four vehicles in a dual-platform four-post lift layout.
192-Inch Post Clearance
Wide post-to-post clearance gives users room to load vehicles across the lift while preserving practical access around the platforms.
Adjustable Inside Runways
The inside runways adjust for different tread widths, helping the HD-9SW accommodate a wider range of vehicle combinations.
Open-Center Runways
Open-center platforms let the HD-9SW function as more than a storage lift, adding maintenance and service access when needed.
Pneumatic Safety Release
A push-button pneumatic release works with multi-position locks to make lowering more controlled and convenient.
Accessory-Ready Rails
Runway rails support optional accessories such as drip trays, solid decks, drive-thru ramps, and rolling bridge jacks.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 9000 lb |
| RISE | |
| A Min Runway Height | 7 in |
| B Max Rise | 70 in |
| C Max Lifting Height | 77 in |
| OUTSIDE DIMENSIONS | |
| D Width | 202 in |
| E Outside Length | 174 in |
| F Overall Length | 218.5 in |
| G Height | 90 in |
| INSIDE DIMENSIONS | |
| H Inside Columns | 192 in |
| I Drive-Thru Clearance | 81 in |
| RUNWAYS | |
| J Runway Width | 19 in |
| K Runway Length | 164 in |
| L Width Between Runways | 34.25 - 41 in |
| M Runway Centerline | 56.25 - 62.75 in |
| N Outside Edge of Runways | 75.25 - 81.75 in |
| MINIMUM WHEELBASE | |
| Rated Wheelbase Capacity | 115 in |
| 25% Capacity | 70 in |
| 50% Capacity | 85 in |
| 75% Capacity | 100 in |
| LOCKING | |
| Locking Positions | 14 |
| Locking Spacing | 4 in |
| POWER UNIT AND VOLTAGE | |
| Horsepower | 2 HP |
| Voltage | 208-230V / 60 Hz / 1-Phase |
| Sound Level | 45 dB |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 22 x 200 x 52 in |
| Shipping Weight | 2796 lb |
| Shipping Method | Flatbed |
| Offload Requirement | Forklift |
