BendPak HD-9ST - 9,000-lb. Capacity / Four-Post Lift / Narrow Width
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Fit 9,000-lbs. of four-post lifting capability into tighter spaces with the HD-9ST narrow-width four-post car lift. Designed for garages and service bays that need dependable vehicle storage or maintenance access without a wider runway layout, it helps support parking, inspections, light service and under-vehicle work. It is a practical choice when floor space is limited but lift capability still matters.
Narrow Four-Post Lifting That Fits Where Space Is Tight
The BendPak HD-9ST Four-Post Lift gives tight garages and compact service bays a real 9,000-lb. lifting solution without forcing a standard-width footprint into a space that cannot handle it. Built as the narrow-width member of the HD-9 family, this four-post lift is made for owners who need parking, storage, and maintenance capability while keeping more room available for tools, equipment, and vehicle access. Its open-center layout lets the HD-9ST work as both a narrow parking lift and a maintenance lift, giving wrenchers more ways to use limited floor space. With 88-inch columns and runways that rise to 75 inches, the HD-9ST keeps a low-profile overall package while still creating enough working height for oil changes, exhaust work, transmission jack positioning, and underbody service.
Narrow-Width Four-Post Lift Built for Space Efficiency
The HD-9ST is designed for garages that feel too tight for a standard-width four-post lift but still need serious BendPak capability. Its narrower stance is ideal for compact vehicles, smaller service bays, and crowded home garages where every inch of width matters. Even with its slimmer footprint, this is not a light-duty hobby lift. The HD-9ST is used in professional shops and serious home garages that need dependable lifting, parking, storage, and service access in a smaller package.
Parking, Storage, and Service in One Open-Center Lift
The open-center design gives users more access beneath the vehicle than a basic parking-only setup. Removable approach ramps add drive-under clearance, while the runways include rail-kit provisions for optional accessories that can expand how the lift is used. For owners who want to stack vehicles, store compact cars, or perform regular maintenance, the HD-9ST delivers a smart mix of parking convenience and practical service capability. Optional accessories such as drip trays, solid decks, drive-thru ramps, and rolling bridge jacks help tailor the lift to the garage or shop.
BendPak Safety Engineering in a Slim Four-Post Package
The HD-9ST uses an electric-hydraulic power system with a single hydraulic cylinder mounted beneath the runway, fully enclosed lifting cables, multi-position safety locks, and adjustable lock ladders. Heavy-duty 3/8-inch aircraft cable, oversized self-lubricating cable rollers, rugged roller axles, and internal anti-sway slider blocks help keep lifting smooth and stable. A push-button pneumatic safety release, independent backup slack-cable safety latches, and protected internal routing for cables, locks, and sheaves support safer everyday operation. It is a slim four-post lift, but the engineering underneath is all BendPak.
Key Features
Narrow Garage Fit
Designed for smaller garages and tight bays, the HD-9ST delivers 9,000-lb. four-post lifting capacity in a space-saving narrow-width package.
75-Inch Runway Rise
The runways raise to 75 inches, giving users real working height while keeping the lift friendly to lower-ceiling spaces.
Open-Center Service Access
The open-center design supports maintenance work, parking, and vehicle storage without turning the lift into a parking-only platform.
Pneumatic Safety Release
A push-button pneumatic release works with multi-position locks to make lowering faster and more controlled.
Accessory-Ready Runways
Built-in rail provisions allow compatibility with optional accessories such as rolling bridge jacks, drip trays, and solid decks.
Protected Cable System
Lifting cables, locks, sheaves, and related components are routed inside the structure for safety, protection, and a cleaner appearance.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 9000 lb |
| RISE | |
| A Min Runway Height | 4.5 in |
| B Max Rise | 70 in |
| C Max Lifting Height | 74.5 in |
| OUTSIDE DIMENSIONS | |
| D Width | 100.25 in |
| E Outside Length | 174 in |
| F Overall Length | 200 in |
| G Height | 88 in |
| INSIDE DIMENSIONS | |
| H Inside Columns | 89.75 in |
| I Drive-Thru Clearance | 76.5 in |
| RUNWAYS | |
| J Runway Width | 19 in |
| K Runway Length | 164 in |
| L Width Between Runways | 37.5 in |
| M Runway Centerline | 56.5 in |
| N Outside Edge of Runways | 75.5 in |
| MINIMUM WHEELBASE | |
| Rated Wheelbase Capacity | 115 in |
| 25% Capacity | 70 in |
| 50% Capacity | 85 in |
| 75% Capacity | 100 in |
| LOCKING | |
| Locking Positions | 12 |
| Locking Spacing | 4 in |
| POWER UNIT AND VOLTAGE | |
| Horsepower | 2 HP |
| Voltage | 208-230V / 60 Hz / 1-Phase |
| Sound Level | 45 dB |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 22 x 168 x 32 in |
| Shipping Weight | 1592 lb |
| Shipping Method | Flatbed |
| Offload Requirement | Forklift |
