BendPak HD-9EWT - 9,000-lb. Capacity / Four-Post Lift / Extra-Wide / High Lift
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Tall garages, wide-body trucks, SUVs, and high-clearance vehicles are a natural fit for the BendPak HD-9EWT, a 9,000-lbs. capacity extra-wide, high-lift four-post lift. With an 82-in. rise and generous overall width, it provides more overhead clearance, more side room, and better access for storage and service.
Extra-Wide High-Rise Lifting for Big Vehicles

The BendPak HD-9EWT Four-Post Lift is built for garages and shops with the space to take advantage of a wider, taller 9,000-lb. parking and service platform. Designed for high ceilings, high-rise storage, and larger vehicle profiles, the HD-9EWT gives wide-body trucks, SUVs, off-road vehicles, and high-clearance vehicles more room to load, park, and service with confidence. This extra-wide high-rise lift is a strong choice when a narrow or standard-width model would feel too tight. With a substantial 82-inch rise from the runways, the HD-9EWT helps create more room for taller technicians below the vehicle and more clearance for larger vehicles parked underneath.
Extra Width for Trucks, SUVs, and Off-Road Builds

The HD-9EWT is better suited for wide cars, off-road vehicles, and larger trucks where mirror, door, and tire clearance matter. The extra-wide design helps reduce the tight squeeze that can happen on narrower lifts, especially when loading vehicles with wider stances or larger wheel and tire packages. For storage, the added width and high-rise clearance make the HD-9EWT a smart solution for garages that need to stack larger vehicles without making every drive-on feel like a precision parking exam. It is built for users who have the room and want to use it wisely.
Integrated Lift Systems Built for Smooth Operation

The HD-9EWT uses an electric-hydraulic power system with controls positioned within reach, a single hydraulic cylinder mounted beneath the runway, heavy-duty lifting cables, and internal routing for cables, airlines, safety latches, and sheaves. Dual-hub cable sheaves help reduce premature wear, while oversized self-lubricating cable rollers, internal anti-sway slider blocks, and multi-position safety locks support stable operation through repeated parking and service cycles.
Safer Loading, Cleaner Storage, and Real Service Capability

Longer approach ramps and low runways make it easier to load sports cars and other low-standing vehicles, while removable approach ramps provide added drive-under clearance when needed. Push-button pneumatic safety release and independent backup slack-cable safety latches support safer lift operation. With accessory-ready runways, optional rolling bridge jack compatibility, and enough space for larger vehicle profiles, the HD-9EWT gives DIY enthusiasts and professional shops a four-post lift that solves storage problems while keeping service capability close at hand.
Key Features
Extra-Wide High-Rise Lift
The HD-9EWT combines extra width with high-rise clearance for larger vehicles, tall bays, and serious storage setups.
82-Inch Rise
A substantial 82-inch rise from the runways creates more room for tall vehicles underneath and more working space below the raised platform.
Wide Vehicle Friendly
The extra-wide layout is better suited for wide cars, trucks, SUVs, and off-road vehicles with larger stances.
Low Runway Loading
Low runways and longer approach ramps help make loading low-standing vehicles smoother and less stressful.
Integrated Safety Routing
Cables, airlines, safety latches, and sheaves are routed internally for protection and a cleaner lift appearance.
Storage Plus Service
The HD-9EWT is built for parking, storage, and service, with accessory-ready runways and optional rolling bridge jack compatibility.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 9000 lb |
| RISE | |
| A Min Runway Height | 4.75 in |
| B Max Rise | 82.17 in |
| C Max Lifting Height | 87 in |
| OUTSIDE DIMENSIONS | |
| D Width | 117 in |
| E Outside Length | 198 in |
| F Overall Length | 224.5 in |
| G Height | 100 in |
| INSIDE DIMENSIONS | |
| H Inside Columns | 107 in |
| I Drive-Thru Clearance | 93.25 in |
| RUNWAYS | |
| J Runway Width | 19 in |
| K Runway Length | 182.25 in |
| L Width Between Runways | 35.75 - 42 in |
| M Runway Centerline | 57.75 - 64 in |
| N Outside Edge of Runways | 76.75 - 83 in |
| MINIMUM WHEELBASE | |
| Rated Wheelbase Capacity | 115 in |
| 25% Capacity | 80 in |
| 75% Capacity | 95 in |
| LOCKING | |
| Locking Positions | 17 |
| Locking Spacing | 4 in |
| POWER UNIT AND VOLTAGE | |
| Horsepower | 2 HP |
| Voltage | 208-230V / 60 Hz / 1-Phase |
| Sound Level | 45 dB |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 22 x 192 x 29 in |
| Shipping Weight | 1852 lb |
| Shipping Method | Flatbed |
| Offload Requirement | Forklift |