BendPak HD-7PXW - 7,000-lb. Capacity / Super-Tall Four-Post Lift / Vehicle Display Platform
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
For vehicle storage, display, and high-clearance parking, the BendPak HD-7PXW provides 7,000-lbs. of super-tall, wide four-post lifting capacity. Built to raise vehicles over 12 feet, the HD-7PXW is ideal for dealers, collectors, and facilities that need impressive vertical storage and strong visual presentation.
Sky-High Four-Post Parking for Storage and Display
The BendPak HD-7PXW Four-Post Lift brings serious height to the HD-7 family, giving owners a 7,000-lb. capacity lift with 182-inch runways and a super-tall rise designed for vehicle storage, display, and service flexibility. If the goal is to stack higher, show better, and make better use of vertical space, the HD-7PXW is the four-post car lift built to make the garage look less crowded and a lot more capable. This model is especially useful for owners who want more clearance than a standard four-post parking lift can provide. Its long runways help accommodate a range of vehicle types and wheelbases, while the high-reaching design gives shops, collectors, and serious home garages a clean way to store or present vehicles without giving up BendPak’s proven 7,000-lb. lifting platform.
Same BendPak HD-7 Safety, Just Taken Higher
The HD-7PXW carries the same safety and convenience DNA found across BendPak four-post lifts. A one-touch pneumatic safety release disengages the locks simultaneously, helping make lowering smoother and more controlled during daily operation. A single hydraulic cylinder is tucked neatly beneath the power-side runway, keeping the lift structure clean and reducing exposed components. Internal anti-sway slider blocks, oversized self-lubricating cable rollers, rugged 1.25-inch roller axles, and heavy-duty aircraft cable all work together to support stable, dependable lifting.
Built for Tall Storage, Display, and Daily Garage Use
With a super-tall rise that delivers 12 feet of lifting height, the HD-7PXW gives users a powerful solution for high-clearance parking, vehicle display, and stacked storage applications. Its 182-inch runways create a confident platform for a wide range of cars and wheelbases. Non-skid ramps help support traction during loading, while multi-position safety locks and adjustable lock ladders allow the lift to settle securely at the right working or storage height. It is a lift for users who want more room above, not more excuses below.
Electric-Hydraulic Power with Enclosed Lift Components
The HD-7PXW uses an electric-hydraulic power system with a single hydraulic cylinder mounted under the runway for efficient operation and clean integration. The lift’s critical components are designed to work inside the four-post structure instead of cluttering the bay. Heavy-duty 3/8-inch aircraft cable, multi-position safety locks, and a push-button pneumatic safety release give the HD-7PXW the confidence expected from a BendPak four-post lift. It is tall, strong, and built to keep vehicle storage and display looking sharp.
Key Features
12-Foot Lift Height
Super-tall rise gives the HD-7PXW serious vertical capability for storage and display. It is the high-reaching option in the HD-7 family.
7,000-lb. Capacity
Built to support a wide range of vehicles up to 7,000 lbs. The lift combines parking utility with BendPak four-post stability.
182-Inch Runways
Long runways help accommodate different vehicle types and wheelbases. That extra platform length makes the lift more flexible for collectors and garages.
Pneumatic Safety Release
A push-button pneumatic release disengages the locks simultaneously. This makes lowering smoother, cleaner, and easier to manage.
Enclosed Lift Components
Critical lifting components are routed within the lift structure for cleaner operation and a better-looking installation.
Aircraft Cable System
Heavy-duty 3/8-inch aircraft cable, oversized rollers, and rugged roller axles support dependable lifting performance.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 7000 lb |
| RISE | |
| A Min Runway Height | 5 in |
| B Max Rise | 140.25 in |
| C Max Lifting Height | 145.25 in |
| OUTSIDE DIMENSIONS | |
| D Width | 110.25 in |
| E Outside Length | 198 in |
| F Overall Length | 213 in |
| G Height | 158 in |
| INSIDE DIMENSIONS | |
| H Inside Columns | 100.25 in |
| I Drive-Thru Clearance | 86.5 in |
| RUNWAYS | |
| J Runway Width | 19 in |
| K Runway Length | 182.25 in |
| L Width Between Runways | 35 - 41 in |
| M Runway Centerline | 57 - 63 in |
| N Outside Edge of Runways | 75.75 - 82 in |
| MINIMUM WHEELBASE | |
| Rated Wheelbase Capacity | 135 in |
| 25% Capacity | 80 in |
| 50% Capacity | 95 in |
| 75% Capacity | 115 in |
| LOCKING | |
| Locking Positions | 31 |
| Locking Spacing | 4 in |
| POWER UNIT AND VOLTAGE | |
| Horsepower | 2 HP |
| Voltage | 208-230V / 60 Hz / 1-Phase |
| Sound Level | 45 dB |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 22 x 192 x 44 in |
| Shipping Weight | 2254 lb |
| Shipping Method | Flatbed |
| Offload Requirement | Forklift |
