Skip to content
🏠 Family-Owned & Operated | 🇺🇸 American-Run & No Call Centers | About Us ->
🏠 Family-Owned & Operated | 🇺🇸 American-Run & No Call Centers | About Us ->

BendPak HD-75BXT

by BendPak
SKU 5175251

FREE SHIPPING

To commercial locations with a forklift for unloading.

Original price $9,995.00 - Original price $9,995.00
Original price
$9,995.00
$9,995.00 - $9,995.00
Current price $9,995.00
$9,995.00
Request a quote
Equipment Delivery Options

At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.

I have the equipment to unload my order

Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.

What to keep in mind when choosing this option:

  • The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
  • Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
  • You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
  • Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
  • There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.

In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.


Pick up at one of our warehouses

Do you have a hitch trailer to transport your lift? If so, then this might be the best option.

What to keep in mind when choosing this option:

  • Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
  • Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.

Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.


Dock Hold from LTL Carrier

Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.

You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.


Ship directly to a local installer

Neither of the above delivery options suits you? Then we have the solution.

We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.

What to keep in mind when choosing this option:

  • You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
  • We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)

Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.

Returns & Refunds

CANCELLATIONS

We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.

RETURNS

Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.

ADDITIONAL WARRANTY INFO

For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.

7,500-lb. Dry Docking Confidence for Boats and Trailers

7,500-lb. Dry Docking Confidence for Boats and Trailers

The BendPak HD-75BXT Boat Lift is built for owners who want a safer, smarter way to store their boat high and dry instead of leaving it exposed to unpredictable water conditions. Saltwater corrosion, barnacles, rust damage, coating blemishes, and weather exposure can take a serious toll over time, and this 7,500-lb. boat lift gives users a dependable dry-docking solution for protecting valuable watercraft. Built with the same quality approach expected from BendPak automotive lifts, the HD-75BXT is designed for boat trailer storage, private garages, and storage businesses that need a durable lift with serious everyday utility. It helps reduce reliance on expensive dry-docking fees while giving boat owners more control over how and where their investment is stored.

Built for Trailer Fitment, Storage Flexibility, and Daily Use

Built for Trailer Fitment, Storage Flexibility, and Daily Use

The HD-75BXT is designed to accommodate most boat trailers with wide and narrow installation options, helping users adapt the lift to a variety of trailer styles. Low-profile, extended-length approach ramps help trailers load onto the runways with less effort, making storage easier for both personal and commercial users. For boat storage businesses, the HD-75BXT can help expand usable storage capacity and create new storage opportunities. For private owners, it offers a practical way to keep the boat closer, cleaner, and better protected without handing control over to marina schedules or monthly storage bills.

Single-Cylinder Hydraulic Design with Protected Components

Single-Cylinder Hydraulic Design with Protected Components

The HD-75BXT uses a maintenance-friendly electric-hydraulic power system and a single hydraulic cylinder hidden beneath the runway for minimum exposure and dependable performance. Four heavy-duty stainless steel wire ropes and heavy-duty aircraft cable support the lifting system, while dual-hub wire rope sheaves help reduce stress and fatigue on the axles, sheaves, and cables. Critical components are integrated and protected, including lifting cables, air lines, safety latches, and sheaves. This enclosed design helps extend the life of the lift and supports the kind of long-term reliability boat owners and storage operators need from a serious dry-docking system.

Automatic Safety Locks for Secure Multi-Level Boat Storage

Automatic Safety Locks for Secure Multi-Level Boat Storage

Multi-level locking positions give the HD-75BXT variable-height storage capability, allowing users to position the lift where it best fits the storage setup. Spring-loaded safety locks engage continuously as the lift is raised, and the lock system can release all four independent safety locks at the same time for easier operation. Stainless and aluminum pneumatic cylinders support push-button lock release, while a secondary lock system acts as a slack-cable device for emergency protection. Combined with rugged 1-1/4-inch roller axles, anti-sway column blocks, and a durable powder coat finish, the HD-75BXT is built to keep boats high, dry, and ready for the next trip.

Key Features

7,500-lb. Boat Lift Capacity

7,500-lb. Boat Lift Capacity

The HD-75BXT is built to support serious boat trailer storage with a 7,500-lb. lifting capacity.

High and Dry Storage

High and Dry Storage

Dry docking helps protect boats from water exposure, corrosion, barnacles, rust, and weather-related damage.

Trailer-Friendly Design

Trailer-Friendly Design

Wide and narrow installation options help the lift accommodate most boat trailer types.

Protected Hydraulic System

Protected Hydraulic System

A single hydraulic cylinder is hidden under the runway for reduced exposure and dependable lifting performance.

Automatic Safety Locks

Automatic Safety Locks

Spring-loaded locks engage as the lift rises, with push-button pneumatic release for easier operation.

Longer Approach Ramps

Longer Approach Ramps

Low-profile, extended-length ramps help boat trailers load onto the runways more easily.

Specifications (Imperial)

CAPACITY
Lifting Capacity 7500 lb
RISE
A Min Runway Height 5 in
B Max Rise 82 in
C Max Lifting Height 87 in
OUTSIDE DIMENSIONS
D Width 133.75 in
E Outside Length 222 in
F Overall Length 248.5 in
G Height 100 in
INSIDE DIMENSIONS
H Inside Columns 122 in
I Drive-Thru Clearance 108.5 in
RUNWAYS
J Runway Width 19 in
K Runway Length 206.25 in
L Width Between Runways 46.5 - 66.5 in
M Runway Centerline 68.5 - 88.5 in
N Outside Edge of Runways 87.5 - 107.5 in
MINIMUM WHEELBASE
Rated Wheelbase Capacity 150 in
25% Capacity 90 in
50% Capacity 110 in
75% Capacity 130 in
LOCKING
Locking Positions 17
Locking Spacing 4 in
POWER UNIT AND VOLTAGE
Voltage 208-230V / 60 Hz / 1-Phase
Sound Level 45 dB
SHIPPING AND DELIVERY
Shipping Dimensions 22 x 214 x 27 in
Shipping Weight 2008 lb
Shipping Method Flatbed
Offload Requirement Forklift
Freight Shipping

To the continental USA

Need help?

Contact us for support today

Financing

Multiple great options available

40+ Locations

Nationwide