BendPak HDS-14XT - 14,000-lb. Capacity / High-Rise Four-Post Lift / Extended Runways
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Long-wheelbase vehicles need more runway, and the BendPak HDS14XT delivers with a 14,000-lbs. capacity extended-length four-post lift built for limousines, long-wheelbase trucks, SUVs, and oversized vehicles. Longer runways, added rise height, and heavy-duty construction give technicians more room, better access, and more flexibility for demanding service applications.
High-Rise Four-Post Clearance with 227.5-Inch Runway Reach
The BendPak HDS-14XT Four-Post Lift is built for shops that need more runway, more rise, and more room to work under larger vehicles. With a 14,000-lb. lifting capacity, extended 227.5-inch runways, and a higher lifting profile, this high-rise four-post lift is designed for limousines, extended trucks, large SUVs, and other vehicles that demand more space than a standard runway setup can provide.
Its 83-inch maximum rise and 89.5-inch maximum lifting height give technicians the overhead clearance they need to stand more comfortably during undercar service. Less crouching and reaching means better workflow, reduced strain, and a more productive service bay for serious commercial shops.
Extended Four-Post Lift Design for Large Vehicle Service
The HDS-14XT gives long-wheelbase vehicles the runway support they need while maintaining the stability BendPak four-post lifts are known for. Extended approach ramps help reduce the angle of ascent, making the lift friendlier to low-clearance vehicles and helping protect customer cars during drive-on loading.
Runways include rail kits for optional accessories, allowing shops to configure the lift around their work. Whether the job calls for storage, inspections, undercar maintenance, or added wheel-service capability with optional rolling bridge jacks, the HDS-14XT gives larger vehicles a proper place to land.
Oversized Sheaves, Aircraft Cables, and Built-In Durability
The HDS-14XT is engineered for long-term durability with massive 10.5-inch dual-hub cable sheaves that help reduce cable wear over time. Four heavy-duty 1/2-inch stainless-steel aircraft-quality lifting cables provide the strength, abrasion resistance, and fatigue protection required for daily shop lifting.
A single hydraulic cylinder beneath the runway powers the lift, while internal anti-sway slider blocks help support smooth, secure movement in each column. Heavy-duty base plates and customizable power unit location give installers and shop owners more flexibility when fitting the lift into a real working bay.
ALI Certified Safety for High-Rise Four-Post Lifting
The HDS-14XT is ALI Certified, giving shops added confidence that the lift meets recognized safety and performance standards. Automatic spring-loaded safety locks engage continuously as the lift rises, while adjustable safety ladders help maintain precise runway leveling, even when floors are not perfectly even.
Independent backup slack-cable safety latches add another layer of protection, and the pneumatic push-button safety release makes lowering operations simple and efficient. Fully enclosed cables, sheaves, and safety systems help reduce pinch points while keeping critical components protected during daily use.
Key Features
High-Rise Clearance
An 83-inch maximum rise and 89.5-inch maximum lifting height give technicians more room to work upright under vehicles.
Extended Runways
The 227.5-inch runways support longer wheelbases, extended trucks, large SUVs, and limousines.
14,000-lb. Capacity
Heavy-duty lifting strength makes the HDS-14XT a strong fit for demanding commercial service environments.
ALI Certified
Certified design helps shops operate with confidence around safety, performance, and professional lift standards.
Low-Clearance Loading
Extended approach ramps help reduce the loading angle for vehicles with lower ground clearance.
Accessory-Ready Runways
Runway rail kits support optional accessories for expanded service capability and shop customization.
Specifications (Imperial)
| CAPACITY | |
| Lifting Capacity | 14000 lb |
| RISE | |
| A Min Runway Height | 7.5 in |
| B Max Rise | 82.75 in |
| C Max Lifting Height | 89.5 in |
| OUTSIDE DIMENSIONS | |
| D Width | 130 in |
| E Outside Length | 243 in |
| F Overall Length | 272 in |
| G Height | 104 in |
| INSIDE DIMENSIONS | |
| H Inside Columns | 120 in |
| I Drive-Thru Clearance | 80.75 in |
| RUNWAYS | |
| J Runway Width | 20 in |
| K Runway Length | 227.5 in |
| L Width Between Runways | 34.5 - 41.5 in |
| M Runway Centerline | 57.5 - 64.5 in |
| N Outside Edge of Runways | 77.5 - 84.5 in |
| MINIMUM WHEELBASE | |
| Rated Wheelbase Capacity | 160 in |
| 25% Capacity | 95 in |
| 50% Capacity | 115 in |
| 75% Capacity | 140 in |
| LOCKING | |
| Locking Positions | 18 |
| Locking Spacing | 4 in |
| POWER UNIT AND VOLTAGE | |
| Horsepower | 2 HP |
| Voltage | 208-230V / 60 Hz / 1-Phase |
| Sound Level | 45 dB |
| SHIPPING AND DELIVERY | |
| Shipping Dimensions | 23 x 239 x 43 in |
| Shipping Weight | 2740 lb |
| Shipping Method | Flatbed |
| Offload Requirement | Forklift |
