BendPak PL6000DC-ADD-ON - Shared Column Add-On Platform & Column Set / Fits PL-6000DC
FREE SHIPPING
To commercial locations with a forklift for unloading.
Equipment Delivery Options
At Wholesale Lifts, our commitment is to provide you with the best customer service. We offer you various delivery options so that you can choose the one that best fits your needs.
I have the equipment to unload my order
Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.
What to keep in mind when choosing this option:
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Wholesale Lifts uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge, which varies by carrier (typically $100+), if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
In case you do not have the necessary equipment to unload the equipment do not worry. Wholesale Lifts offers other delivery options.
Pick up at one of our warehouses
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
What to keep in mind when choosing this option:
- Wholesale Lifts and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
- Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer.
Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Dock Hold from LTL Carrier
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Ship directly to a local installer
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
What to keep in mind when choosing this option:
- You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
- We will quote the installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation)
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Wholesale Lifts, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Returns & Refunds
CANCELLATIONS
We incur many costs when processing and shipping orders. If the order is canceled before the item has shipped, but after payment has been processed, we will credit the customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable. Customers will be charged for shipping costs for any orders that are canceled after the item has already shipped, but not yet received by the customer. They may also be responsible for a restocking fee.
RETURNS
Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Wholesale Lifts, LLC. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received. For all merchandise returned to Wholesale Lifts, LLC for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Wholesale Lifts, LLC Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. All returns must have the R.G.A. number written on the outside of the carton. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.
ADDITIONAL WARRANTY INFO
For all warranty considerations, the original manufacturer will supply replacement parts only during the warranty period. The original purchaser is responsible for all shipping, handling, and any labor charges incurred. Hydraulic/Pneumatic cylinders may qualify for exchange under warranty if reported within the first 30 days from date of sale. After the first 30 days from date of sale, a seal kit and installation instructions will be sent for cylinder repairs. All defective parts must be returned to the original manufacturer for inspection and examination. Any parts that are found to be defective will be replaced or repaired to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance. Wholesale Lifts, LLC is not to be held responsible for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity, corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF A WHOLESALE LIFTS, LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
Expand a PL6000DC parking lift layout with an add-on platform set designed for shared-column installations. Built for special-order parking configurations, this package includes the platform, column set and power unit needed to extend vehicle storage capability while helping facilities, garages and storage operations make better use of available floor space.
Expand Parking Capacity Without Starting Over

The BendPak PL6000DC Add-On Platform and Column Set is built for facilities that already understand the value of shared-column parking and want to expand capacity with a system designed around the PL6000DC platform. Instead of treating additional parking as a separate installation problem, this add-on set helps extend the PL6000DC layout with compatible platform and column hardware. For real estate developers, architects, engineers, automotive dealers, and commercial parking operators, that scalability matters. The PL6000DC system is designed to fit inside a typical 8-foot parking space, accommodate most cars and light trucks, and support both long-term upper-level parking and more frequent vehicle access below.
Shared Columns Make Dense Parking Smarter

The shared-column design is one of the major advantages of the PL6000DC system. By allowing multiple parking lifts to be installed in minimum space, the layout helps increase vehicle density without turning the facility into a maze of standalone structures. When installed in ganged configurations, the PL6000DC add-on approach can reduce duplicated column requirements and help make better use of available space. That makes it especially useful for parking garages, residential developments, dealership inventory areas, and commercial facilities where every bay has to work harder.
Commercial-Grade Platform Design for Daily Parking Use

The PL6000DC platform is built around commercial-grade design and construction, with a galvanized and corrugated anti-slip surface that supports vehicle parking in demanding environments. Full-width channel-locked center panels help protect the lower vehicle, while the wide deck platform accommodates pickups, vans, and cars. The platform can be stopped at different heights to fit various vehicles and ceiling heights, giving operators more flexibility in real-world parking layouts. Designed for installation on typical parking surfaces, the system is built to support both indoor and outdoor parking applications where dependable daily use matters.
Hydraulic Operation and Safety Systems Built Into the PL6000DC Platform

The PL6000DC system uses hydraulic lifting with direct-drive cylinder operation, automatic safety lock engagement, anti-fall protection, hydraulic overloading protection, and mechanical safety locks spaced every 4 inches. An electric key switch, automatic shut-off when the operator releases the key, 24VAC operator controls, emergency stop button, pressure relief valve, and upper limit switch all support safer operation. Maintenance-free composite carriage bearings help reduce ongoing service needs, while the overhead power unit supports smooth, quiet hydraulic operation. For facilities expanding an existing PL6000DC parking system, this add-on set keeps the focus where it belongs: more usable parking with controlled operation and fewer headaches.
Specifications (Imperial)
| STYLE | |
| Style | Two-Post Parking Lift |
| Number of Platforms | 1 |
| CAPACITY | |
| Lifting Capacity | 6000 lb |
| RISE AND LOCKING | |
| Lock Release | Manual Release |
| Lifting Time | 60 seconds |
| POWER AND CONTROLS | |
| Voltage | 208-240V / 50/60 Hz / 1-Phase |
| Amperage | 22 Amps |
| Sound Level | 52 dB |
| SHIPPING AND DELIVERY | |
| Shipping Method | Flatbed |
| Offload Requirement | Forklift |